В ADDA-FL-YL роторный лепесток, или Корни, расходомер измерения положительного смещения для чистых жидкостей, включая масла и вязкие среды.DN25DN150 жидкой серии предлагает LCD индикацию, опционально 0.2% точность, и выбираемый импульс, 420 мА, Модбус RTU RS485 и HART выходы.
Авторитетные квалификационные сертификаты
Мы имеем сертификацию качества ISO, национальную квалификацию высокотехнологичного предприятия, одобрение типа измерительного прибора в Китае, а также взрывозащищенные сертификаты и сертификаты безопасности для поддержки надежного качества продукции.
Инженерное дело на заказ
Настраиваемые материалы, соединения, сигналы, дисплеи и решения для установки для различных технологических сред.
The ADDA-FL-YL rotary lobe flow meter, also known as a Roots flow meter, measures volume by positive displacement. A pair of figure-eight rotors turns under the pressure difference across the meter. Each revolution displaces a fixed volume, and the rotation signal is used to calculate the total volume passing through the meter.
The liquid version is suitable for clean liquids without hard particles, including oils and viscous media. The specifications and flow tables below apply to the liquid series. For gas service, contact us to confirm the appropriate configuration, measurement range and operating conditions.
ADDA-FL-YL catalogue product illustration.
Особенности
Positive displacement measurement with 0.5% accuracy and optional 0.2% accuracy.
A broad measuring range with stable metering at the specified low-flow limits.
Suitable for oils and viscous liquids within the stated viscosity ranges.
Minimal straight-pipe requirements upstream and downstream.
Selectable electrical outputs and optional high-temperature or jacketed configurations.
Принцип работы
Two symmetrical figure-eight rotors are mounted with a small, non-contact clearance in the measuring chamber. The pressure difference between the inlet and outlet rotates the pair. The rotors, housing and partitions enclose measuring pockets that carry liquid through the meter. Each revolution transfers four fixed chamber volumes. A magnetic coupling detects rotation and produces pulses for flow measurement and totalization.
V0 = 4 × Vc, where V0 is the displaced volume per rotor revolution, expressed in m³/rev or L/rev, and Vc is the volume of one measuring chamber.
Rotary-lobe measuring cycle.
Liquid Series Specifications
Параметр
Спецификация
Measured media
Clean liquids without impurities, including diesel, gasoline, methanol, ethanol, distilled spirits, petroleum products, and compatible acid or alkaline liquids
Номинальный размер
DN25–DN150
Защита входа
IP66
Materials
SUS304 or SUS316L stainless steel
Питание
24 V DC or 3.6 V lithium battery, depending on the configuration
Параметры вывода
4–20 mA, Modbus RTU RS485 and pulse; HART available with output option F
Рейтинг давления
1.0–6.3 MPa; select the ordered pressure class
Standard LCD version temperature range
-20°C to +80°C
High-temperature LCD version temperature range
-20°C to +120°C
Дисплей
ЖК-цифровой дисплей
Точность
0.5%; 0.2% optional. See the ordering accuracy codes.
Liquid Flow Ranges by Viscosity
Select the nominal size and accuracy for the viscosity at operating temperature. The following liquid flow ranges are in m³/h and must not be applied to gas service.
Viscosity 0.6–3 mPa·s
Номинальный размер
0.5% accuracy (m³/h)
0.2% accuracy (m³/h)
ДН25
1.2~6
2~6
ДН40
3.2~16
5~16
ДН50
5~25
8~25
ДН80
12~60
20~60
ДН100
20~100
33~100
ДН150
50~250
80~250
Viscosity 3–150 mPa·s
Номинальный размер
0.5% accuracy (m³/h)
0.2% accuracy (m³/h)
ДН25
0.6~6
1.5~6
ДН40
1.6~16
6~16
ДН50
2.5~25
6~25
ДН80
6~60
15~60
ДН100
10~100
25~100
ДН150
25~250
60~250
Приложения
Petroleum, chemical processing, environmental protection, marine, metallurgy, power generation, transportation, food, pharmaceutical, defense and research applications. Confirm the wetted materials and configuration for the intended process.
Выбор модели
Base model: ADDA-FL-YL. Select the required options below.
Selection
Код
Опция
Series
ГВТ
High-temperature type
Series
ДЖЕЙТИ
Jacketed type
Номинальный размер
DN25–DN150
Select the size for the required flow and viscosity.
Рейтинг давления
PN10 — PN63
State the flange standard and sealing face when ordering.
Optional flameproof configuration, Ex db IIC T6 Gb; confirm on request
Specify the required wetted materials when ordering.
Explosion protection is an order option, not a standard feature of every meter. Confirm the selected Ex marking, applicable approval documents and operating conditions before ordering.
Пожалуйста, укажите измеряемую среду, диапазон измерения, температуру процесса, технологическое давление, тип соединения, выходной сигнал, источник питания, среду установки и метод связи, если требуется удаленный мониторинг.
Да. ADDA может предоставить индивидуальные решения, основанные на диапазоне измерения, технологическом соединении, смоченном материале, типе отображения, протоколе связи, методе установки и рабочей среде.
Многие приборы ADDA доступны со взрывозащищенными или искробезопасными конфигурациями. пожалуйста, подтвердите требования классификации и сертификации объекта перед выбором.
Да. Наша команда может помочь рекомендовать подходящую конфигурацию прибора после рассмотрения условий применения, включая требования к среде, дальности, подключению, выходному сигналу и установке.
Время выполнения зависит от типа продукта, количества, требований к настройке, и потребности сертификации Стандартные продукты обычно имеют более короткий срок поставки, в то время как индивидуальные модели могут потребовать дополнительного времени производства.