Артикул ADDA-FL-CL Рубрика

Расходомер микрошестерни ADDA-FL-CL

ADDA-CL - это расходомер с положительным смещением для чистых однофазных жидкостей, включая малопоточные и вязкожидкостные приложения. Серия DN4 (DN50) предлагает ЖК-индикацию и выбираемые импульсные, 420 мА, Modbus RTU RS485 или переключающие выходы.

Авторитетные квалификационные сертификаты

Мы имеем сертификацию качества ISO, национальную квалификацию высокотехнологичного предприятия, одобрение типа измерительного прибора в Китае, а также взрывозащищенные сертификаты и сертификаты безопасности для поддержки надежного качества продукции.

Инженерное дело на заказ

Настраиваемые материалы, соединения, сигналы, дисплеи и решения для установки для различных технологических сред.

Обзор | Спецификации | Диапазоны потоков | Размеры

Обзор

The ADDA-FL-CL measures liquid volume using a pair of precision circular gears. Differential pressure drives the gears and moves fixed volumes of liquid through the measuring chamber. The meter is intended for clean, single-phase liquids without solid particles and is suitable for viscous-liquid and low-flow metering.

ADDA-FL-CL micro gear flow meter with LCD display
ADDA-FL-CL micro gear flow meter.

Особенности

  • Compact positive displacement design with low starting flow. Select the flow range by nominal size.
  • Accuracy options of 0.5% and 0.2%. Higher viscosity reduces internal leakage within the applicable operating range.
  • Circular gears provide smooth torque, low vibration and low noise, with lower flow pulsation than an oval gear design.
  • Little or no upstream and downstream straight-pipe length is required; measurement is not dependent on a developed flow profile.
  • Threaded, flanged and clamp connection options.
  • Selectable pulse, 4–20 mA, Modbus RTU RS485 and switching outputs.
  • Wetted material options for different liquid chemistries, including stainless steel, PTFE, PEEK and Hastelloy C-276.

Принцип работы

A pair of circular involute gears rotates in opposite directions under the inlet-to-outlet pressure difference. The spaces between the gear teeth and the housing form separate, fixed-volume pockets that carry liquid from the inlet to the outlet. Each revolution displaces a defined volume. A magnetic sensor detects the gear movement so that the pulses can be used to calculate total volume and flow rate.

V = V0 × n, where V is total volume, V0 is displacement per gear revolution and n is the total number of revolutions.

Micro gear flow meter cross section showing meshing gears and fluid path
Fluid is carried through fixed-volume spaces between the gear teeth and housing.

Технические характеристики

ПараметрСпецификация
Measured mediaClean liquids without impurities, including diesel, gasoline, methanol, ethanol, resin adhesives, oils, petroleum products, and compatible acid or alkaline liquids
Номинальный размерDN4–DN50
Защита входаIP66
MaterialsSUS304; SUS316L; PTFE; PEEK; Hastelloy C-276
Питание9–26 V DC
Параметры вывода4–20 mA, Modbus RTU RS485, pulse and switching outputs
Рейтинг давленияConfirm on request for the selected size, material and connection
Temperature range-40°C to +180°C, depending on the selected configuration
ДисплейЖК-цифровой дисплей
Точность0.5%; 0.2% optional. See the ordering accuracy codes.

Flow Ranges and K Factors

Номинальный размерFlow range (L/h)K factor (P/L)Thread
ДН40.6~5011200G1/4
ДН65~2504780G3/8
DN810~5003468Г1/2
ДН1020~12002780Г1/2
ДН15200~3000334Г3/4
DN20/DN25300~4500890Г3/4
DN32/DN401000~1200059Г1
ДН502000~2000039G1-1/4

The final operating range and pressure rating must suit the selected materials and process conditions. Use the meter-specific calibration factor when commissioning. Customized configurations are available on request.

Приложения

Petroleum, chemical processing, environmental protection, marine, metallurgy, power generation, transportation, food, pharmaceutical, defense and research applications. Confirm the wetted materials and configuration for the intended process.

Выбор модели

Base model: ADDA-FL-CL. State the required pressure rating, flange standard, flange sealing face, thread specification or clamp specification when ordering.

SelectionКодОпция
Process connectionFFlanged
Process connectionLThreaded
Process connectionKClamp
Номинальный размерDN4–DN50Select by flow range
Рейтинг давленияConfirm on requestSpecify the required PN rating and connection details
Материал4304 нержавеющая сталь
Материал6316L нержавеющая сталь
МатериалPPTFE
МатериалkPEEK
МатериалHHastelloy C-276
OutputAТрехпроводной импульс
OutputBДвухпроводный 420 мА
OutputCТрехпроводный 420 мА
OutputDFour-wire 4–20 mA
OutputEModbus RTU RS485
OutputFTwo switching outputs
Электрическое соединениеSМ20 × 1,5, ПВХ
Электрическое соединениеMМ20 × 1,5, СУС304
Электрическое соединениеN1/2 ДНЯО, SUS304
Электрическое соединениеDHirschmann connector
Электрическое соединениеHCircular aviation connector
Точность1±0,5% ФС.
Точность2±0,2% ФС.
ВзрывозащитаNNon-explosion-proof configuration
ВзрывозащитаDOptional flameproof configuration, Ex db IIC T6 Gb; confirm on request

Multiple output signals can be selected. For a multi-output configuration, electrical connection codes H and D cannot be used.

Specify the required wetted materials when ordering.

Explosion protection is an order option, not a standard feature of every meter. Confirm the selected Ex marking, applicable approval documents and operating conditions before ordering.

Размеры

Micro gear flow meter side and top dimensional drawing
Dimensional reference drawing for the ADDA-FL-CL series.
Body dimensions
Номинальный размерABCD
ДН4Φ83795575
ДН6Φ83795575
DN8Φ83776575
ДН10Φ83776575
ДН15Φ1131076575
DN20/DN25Φ1131076575
DN32/DN40Φ1481408275
ДН50Φ21817010075
Connection and mounting dimensions
Номинальный размерEFGH
ДН4G1/440М618
ДН6G3/855М616
DN8Г1/255М619.5
ДН10Г1/255М619.5
ДН15Г3/490М627
DN20/DN25Г3/490М627
DN32/DN40Г1110M835
ДН50G1-1/4180M845

These are standard-product reference dimensions. Customized dimensions are available for special operating conditions. Confirm the dimensional units and the installation drawing for the ordered configuration.

Связанные продукты

Витрина дела

Часто задаваемые вопросы

Найдите быстрые ответы о выборе продукта, настройке, технических параметрах, доставке и поддержке промышленных измерительных приборов ADDA.

官询盘

Пожалуйста, укажите измеряемую среду, диапазон измерения, температуру процесса, технологическое давление, тип соединения, выходной сигнал, источник питания, среду установки и метод связи, если требуется удаленный мониторинг.

Да. ADDA может предоставить индивидуальные решения, основанные на диапазоне измерения, технологическом соединении, смоченном материале, типе отображения, протоколе связи, методе установки и рабочей среде.

Многие приборы ADDA доступны со взрывозащищенными или искробезопасными конфигурациями. пожалуйста, подтвердите требования классификации и сертификации объекта перед выбором.

Да. Наша команда может помочь рекомендовать подходящую конфигурацию прибора после рассмотрения условий применения, включая требования к среде, дальности, подключению, выходному сигналу и установке.

Время выполнения зависит от типа продукта, количества, требований к настройке, и потребности сертификации Стандартные продукты обычно имеют более короткий срок поставки, в то время как индивидуальные модели могут потребовать дополнительного времени производства.

Свяжитесь с нами для сотрудничества

官询盘