Продукция

Спиральный двухроторный расходомер ADDA-FL-LX

Артикул ADDA-FL-LX Рубрика

Спиральный двухроторный расходомер ADDA-FL-LX

ADDA-FL-LX - это расходомер с положительным смещением для дозирования жидкости в широком диапазоне вязкости. Серия DN25 — DN300 использует парные спиральные роторы и предлагает стандартные конфигурации с высокой вязкостью, высокой температурой и рубашкой, с дополнительным импульсом, 420 мА, Modbus RTU RS485 и выходами HART.

Авторитетные квалификационные сертификаты

Мы имеем сертификацию качества ISO, национальную квалификацию высокотехнологичного предприятия, одобрение типа измерительного прибора в Китае, а также взрывозащищенные сертификаты и сертификаты безопасности для поддержки надежного качества продукции.

Инженерное дело на заказ

Настраиваемые материалы, соединения, сигналы, дисплеи и решения для установки для различных технологических сред.

Обзор | Спецификации | Диапазоны потоков | Размеры

Обзор

The ADDA-FL-LX is a positive displacement flow meter with two helical rotors. Liquid pressure drives the rotors and transfers measured volumes through enclosed chambers. Counting rotor revolutions provides total volume and instantaneous flow. The design supports smooth liquid delivery over a wide viscosity range and does not require a developed flow profile.

Catalogue product illustration for the ADDA-FL-LX helical twin rotor flow meter
ADDA-FL-LX catalogue product illustration.

Особенности

  • Smooth operation with low noise and a design intended to avoid flow pulsation during continuous high-flow service.
  • High flow capacity for the nominal size with low pressure loss.
  • Accuracy of 0.5%, with 0.2% available as an option.
  • Standard and high-viscosity variants covering the viscosity bands listed in the flow tables.
  • Non-contact rotors reduce wear; confirm compatibility for the actual process liquid.
  • No upstream or downstream straight-pipe section is required.
  • High-temperature and jacketed configurations are available for suitable processes.

Принцип работы

A pair of specially shaped 45° helical rotors is installed in the measuring chamber. The inlet-to-outlet pressure difference drives the rotors, while the rotor surfaces and housing enclose fixed-volume pockets. Each revolution transfers eight chamber volumes from the inlet to the outlet. Magnetic or photoelectric sensing converts rotor motion into total volume and instantaneous flow rate.

V = 8 × V0 × n, where V is total measured volume, V0 is the volume of one measuring chamber and n is the number of rotor revolutions.

Технические характеристики

ПараметрСпецификация
Measured mediaClean liquids compatible with the selected materials, including oil, petroleum products, diesel, adhesives, emulsions, bitumen, resins, and acid or alkaline liquids
Номинальный размерDN25–DN300
Защита входаIP66
MaterialsSUS304 or SUS316L stainless steel
Питание24 V DC or 3.6 V lithium battery, depending on the configuration
Параметры вывода4–20 mA, Modbus RTU RS485 and pulse; HART available with output option F
Рейтинг давления1.0–6.3 MPa; select the ordered pressure class
Standard LCD version temperature range-20°C to +80°C
High-temperature LCD version temperature range-20°C to +300°C
ДисплейЖК-цифровой дисплей
Точность0.5%; 0.2% optional. See the ordering accuracy codes.

Flow Ranges by Viscosity

Choose the nominal size, accuracy and variant using the viscosity at the operating temperature. All flow ranges below are in m³/h.

GC standard type, viscosity 0.6–2 mPa·s
Номинальный размер0.5% accuracy (m³/h)0.2% accuracy (m³/h)
ДН253~103.5~8
ДН407~208~20
ДН509~3615~36
ДН8020~8030~80
ДН10025~10040~100
ДН15022~22588~220
ДН20090~360150~360
ДН250130~540180~540
ДН300220~800250~800
GC standard type, viscosity 2–400 mPa·s
Номинальный размер0.5% accuracy (m³/h)0.2% accuracy (m³/h)
ДН252~102~10
ДН402.5~252.5~25
ДН503.6~363.6~36
ДН8010~10010~100
ДН10015~15015~150
ДН15025~25025~250
ДН20060~42060~420
ДН25080~60080~600
ДН30095~95095~950
GN high-viscosity type, viscosity 400–2000 mPa·s
Номинальный размер0.5% accuracy (m³/h)0.2% accuracy (m³/h)
ДН252~82~8
ДН402~184~18
ДН502.8~256~25
ДН806.5~5614~56
ДН1008.5~8018~72
ДН15018~15038~150
ДН20028~24050~210
ДН25042~36090~360
ДН30070~600150~600
GN high-viscosity type, viscosity 2000–3500 mPa·s
Номинальный размер0.5% accuracy (m³/h)0.2% accuracy (m³/h)
ДН252~62~6
ДН403~123~12
ДН504.5~184.5~18
ДН805~4010~40
ДН1006.5~5514~55
ДН15010~10025~100
ДН20020~16040~160
ДН25030~24060~240
ДН30054~450110~450

Приложения

Petroleum, chemical processing, environmental protection, marine, metallurgy, power generation, transportation, food, pharmaceutical, defense and research applications. Confirm the wetted materials and configuration for the intended process.

Выбор модели

Base model: ADDA-FL-LX. Select the required options below.

SelectionКодОпция
SeriesГВТHigh-temperature type
SeriesГНHigh-viscosity type
SeriesДЖЕЙТИJacketed type
Номинальный размерDN25–DN300Select the size for the required flow and viscosity.
Рейтинг давленияPN10 — PN63State the flange standard and sealing face when ordering.
Материал4304 нержавеющая сталь
Материал6316L нержавеющая сталь
OutputAИмпульс + 420 мА
OutputBТрехпроводной импульс
OutputCДвухпроводный 420 мА
OutputEИмпульс + 4 — 20 мА + Modbus RTU RS485
OutputFИмпульс + 4 — 20 мА + Modbus RTU RS485, с HART + 40 мА + Modbus RTU
Электрическое соединениеSМ20 × 1,5, ПВХ
Электрическое соединениеMМ20 × 1,5, СУС304
Электрическое соединениеN1/2 ДНЯО, SUS304
Точность1±0,5% ФС.
Точность2±0,2% ФС.
ВзрывозащитаNNon-explosion-proof configuration
ВзрывозащитаDOptional flameproof configuration, Ex db IIC T6 Gb; confirm on request

Specify the required wetted materials when ordering.

Explosion protection is an order option, not a standard feature of every meter. Confirm the selected Ex marking, applicable approval documents and operating conditions before ordering.

Размеры

Helical twin rotor flow meter sectional and flange dimensions
Body and flange dimension references for the ADDA-FL-LX series.
Body dimensions — Part 1 of 2
DN (mm)L (mm)H (mm)B (mm)
25300378175
40300414185
50340480230
80380533280
100440584320
150540683410
200640757455
250700844550
300800994645
Body dimensions — Part 2 of 2
DN (mm)C (mm)I (mm)
2521883
40254101
50307126
80360156
100411184
150510226
200584265
250671309
300821390
Flange dimensions
DN (mm)D (mm)D1 (mm)NHole diameter (mm)
2511585414
40150110418
50165125418
80200160818
100220180818
150285240822
2003402951222
2504053551226
3004604101226

The flange dimensions shown are based on PN16. For high-temperature versions, increase H by 100 mm for DN25–DN40 and by 160 mm for DN50–DN300. Confirm the installation dimensions for the specified pressure class and configuration.

Связанные продукты

Витрина дела

Часто задаваемые вопросы

Найдите быстрые ответы о выборе продукта, настройке, технических параметрах, доставке и поддержке промышленных измерительных приборов ADDA.

官询盘

Пожалуйста, укажите измеряемую среду, диапазон измерения, температуру процесса, технологическое давление, тип соединения, выходной сигнал, источник питания, среду установки и метод связи, если требуется удаленный мониторинг.

Да. ADDA может предоставить индивидуальные решения, основанные на диапазоне измерения, технологическом соединении, смоченном материале, типе отображения, протоколе связи, методе установки и рабочей среде.

Многие приборы ADDA доступны со взрывозащищенными или искробезопасными конфигурациями. пожалуйста, подтвердите требования классификации и сертификации объекта перед выбором.

Да. Наша команда может помочь рекомендовать подходящую конфигурацию прибора после рассмотрения условий применения, включая требования к среде, дальности, подключению, выходному сигналу и установке.

Время выполнения зависит от типа продукта, количества, требований к настройке, и потребности сертификации Стандартные продукты обычно имеют более короткий срок поставки, в то время как индивидуальные модели могут потребовать дополнительного времени производства.

Свяжитесь с нами для сотрудничества

官询盘