ADDA-FL-YL 로터리 로브 또는 Roots 유량계는 오일 및 점성 매체를 포함한 깨끗한 액체에 대해 용적식 측정을 사용합니다. DN25–DN150 액체 시리즈는 LCD 표시,옵션 0,2% 정확도 및 선택 가능한 펄스,4–20 mA,Modbus RTU RS485 및 HART 출력을 제공합니다.
권위있는 자격 인증
우리는 ISO 품질 인증, 국가 하이테크 기업 자격, 중국 측정 기기 형식 승인, 폭발 방지 및 안전 인증을 보유하여 신뢰할 수있는 제품 품질을 지원합니다.
The ADDA-FL-YL rotary lobe flow meter, also known as a Roots flow meter, measures volume by positive displacement. A pair of figure-eight rotors turns under the pressure difference across the meter. Each revolution displaces a fixed volume, and the rotation signal is used to calculate the total volume passing through the meter.
The liquid version is suitable for clean liquids without hard particles, including oils and viscous media. The specifications and flow tables below apply to the liquid series. For gas service, contact us to confirm the appropriate configuration, measurement range and operating conditions.
ADDA-FL-YL catalogue product illustration.
Features
Positive displacement measurement with 0.5% accuracy and optional 0.2% accuracy.
A broad measuring range with stable metering at the specified low-flow limits.
Suitable for oils and viscous liquids within the stated viscosity ranges.
Minimal straight-pipe requirements upstream and downstream.
Selectable electrical outputs and optional high-temperature or jacketed configurations.
Operating Principle
Two symmetrical figure-eight rotors are mounted with a small, non-contact clearance in the measuring chamber. The pressure difference between the inlet and outlet rotates the pair. The rotors, housing and partitions enclose measuring pockets that carry liquid through the meter. Each revolution transfers four fixed chamber volumes. A magnetic coupling detects rotation and produces pulses for flow measurement and totalization.
V0 = 4 × Vc, where V0 is the displaced volume per rotor revolution, expressed in m³/rev or L/rev, and Vc is the volume of one measuring chamber.
Rotary-lobe measuring cycle.
Liquid Series Specifications
Parameter
Specification
Measured media
Clean liquids without impurities, including diesel, gasoline, methanol, ethanol, distilled spirits, petroleum products, and compatible acid or alkaline liquids
Nominal size
DN25–DN150
Ingress protection
IP66
Materials
SUS304 or SUS316L stainless steel
Power supply
24 V DC or 3.6 V lithium battery, depending on the configuration
Output options
4–20 mA, Modbus RTU RS485 and pulse; HART available with output option F
Pressure rating
1.0–6.3 MPa; select the ordered pressure class
Standard LCD version temperature range
-20°C to +80°C
High-temperature LCD version temperature range
-20°C to +120°C
Display
LCD digital display
정확성
0.5%; 0.2% optional. See the ordering accuracy codes.
Liquid Flow Ranges by Viscosity
Select the nominal size and accuracy for the viscosity at operating temperature. The following liquid flow ranges are in m³/h and must not be applied to gas service.
Viscosity 0.6–3 mPa·s
Nominal size
0.5% accuracy (m³/h)
0.2% accuracy (m³/h)
DN25
1.2~6
2~6
DN40
3.2~16
5~16
DN50
5~25
8~25
DN80
12~60
20~60
DN100
20~100
33~100
DN150
50~250
80~250
Viscosity 3–150 mPa·s
Nominal size
0.5% accuracy (m³/h)
0.2% accuracy (m³/h)
DN25
0.6~6
1.5~6
DN40
1.6~16
6~16
DN50
2.5~25
6~25
DN80
6~60
15~60
DN100
10~100
25~100
DN150
25~250
60~250
애플리케이션
Petroleum, chemical processing, environmental protection, marine, metallurgy, power generation, transportation, food, pharmaceutical, defense and research applications. Confirm the wetted materials and configuration for the intended process.
Model Selection
Base model: ADDA-FL-YL. Select the required options below.
Selection
코드
옵션
Series
GW
High-temperature type
Series
JT
Jacketed type
Nominal size
DN25–DN150
Select the size for the required flow and viscosity.
Pressure rating
PN10–PN63
State the flange standard and sealing face when ordering.
Material
4
304 stainless steel
Material
6
316L stainless steel
Output
A
Pulse + 4–20 mA
Output
B
Three-wire pulse
Output
C
Two-wire 4–20 mA
Output
E
Pulse + 4–20 mA + Modbus RTU RS485
Output
F
Pulse + 4–20 mA + Modbus RTU RS485, with HART
Electrical connection
S
M20 × 1.5, PVC
Electrical connection
M
M20 × 1.5, SUS304
Electrical connection
N
1/2 NPT, SUS304
정확성
1
±0.5% F.S.
정확성
2
±0.2% F.S.
Explosion protection
N
Non-explosion-proof configuration
Explosion protection
D
Optional flameproof configuration, Ex db IIC T6 Gb; confirm on request
Specify the required wetted materials when ordering.
Explosion protection is an order option, not a standard feature of every meter. Confirm the selected Ex marking, applicable approval documents and operating conditions before ordering.