The ADDA-FL-CL measures liquid volume using a pair of precision circular gears. Differential pressure drives the gears and moves fixed volumes of liquid through the measuring chamber. The meter is intended for clean, single-phase liquids without solid particles and is suitable for viscous-liquid and low-flow metering.
ADDA-FL-CL micro gear flow meter.
Features
Compact positive displacement design with low starting flow. Select the flow range by nominal size.
Accuracy options of 0.5% and 0.2%. Higher viscosity reduces internal leakage within the applicable operating range.
Circular gears provide smooth torque, low vibration and low noise, with lower flow pulsation than an oval gear design.
Little or no upstream and downstream straight-pipe length is required; measurement is not dependent on a developed flow profile.
Threaded, flanged and clamp connection options.
Selectable pulse, 4–20 mA, Modbus RTU RS485 and switching outputs.
Wetted material options for different liquid chemistries, including stainless steel, PTFE, PEEK and Hastelloy C-276.
Operating Principle
A pair of circular involute gears rotates in opposite directions under the inlet-to-outlet pressure difference. The spaces between the gear teeth and the housing form separate, fixed-volume pockets that carry liquid from the inlet to the outlet. Each revolution displaces a defined volume. A magnetic sensor detects the gear movement so that the pulses can be used to calculate total volume and flow rate.
V = V0 × n, where V is total volume, V0 is displacement per gear revolution and n is the total number of revolutions.
Fluid is carried through fixed-volume spaces between the gear teeth and housing.
Technical Specifications
Parameter
Specification
Measured media
Clean liquids without impurities, including diesel, gasoline, methanol, ethanol, resin adhesives, oils, petroleum products, and compatible acid or alkaline liquids
Nominal size
DN4–DN50
Ingress protection
IP66
Materials
SUS304; SUS316L; PTFE; PEEK; Hastelloy C-276
Power supply
9–26 V DC
Output options
4–20 mA, Modbus RTU RS485, pulse and switching outputs
Pressure rating
Confirm on request for the selected size, material and connection
Temperature range
-40°C to +180°C, depending on the selected configuration
Display
LCD digital display
정확성
0.5%; 0.2% optional. See the ordering accuracy codes.
Flow Ranges and K Factors
Nominal size
Flow range (L/h)
K factor (P/L)
Thread
DN4
0.6~50
11200
G1/4
DN6
5~250
4780
G3/8
DN8
10~500
3468
G1/2
DN10
20~1200
2780
G1/2
DN15
200~3000
334
G3/4
DN20/DN25
300~4500
890
G3/4
DN32/DN40
1000~12000
59
G1
DN50
2000~20000
39
G1-1/4
The final operating range and pressure rating must suit the selected materials and process conditions. Use the meter-specific calibration factor when commissioning. Customized configurations are available on request.
애플리케이션
Petroleum, chemical processing, environmental protection, marine, metallurgy, power generation, transportation, food, pharmaceutical, defense and research applications. Confirm the wetted materials and configuration for the intended process.
Model Selection
Base model: ADDA-FL-CL. State the required pressure rating, flange standard, flange sealing face, thread specification or clamp specification when ordering.
Selection
코드
옵션
Process connection
F
Flanged
Process connection
L
Threaded
Process connection
K
Clamp
Nominal size
DN4–DN50
Select by flow range
Pressure rating
Confirm on request
Specify the required PN rating and connection details
Material
4
304 stainless steel
Material
6
316L stainless steel
Material
P
PTFE
Material
k
PEEK
Material
H
Hastelloy C-276
Output
A
Three-wire pulse
Output
B
Two-wire 4–20 mA
Output
C
Three-wire 4–20 mA
Output
D
Four-wire 4–20 mA
Output
E
Modbus RTU RS485
Output
F
Two switching outputs
Electrical connection
S
M20 × 1.5, PVC
Electrical connection
M
M20 × 1.5, SUS304
Electrical connection
N
1/2 NPT, SUS304
Electrical connection
D
Hirschmann connector
Electrical connection
H
Circular aviation connector
정확성
1
±0.5% F.S.
정확성
2
±0.2% F.S.
Explosion protection
N
Non-explosion-proof configuration
Explosion protection
D
Optional flameproof configuration, Ex db IIC T6 Gb; confirm on request
Multiple output signals can be selected. For a multi-output configuration, electrical connection codes H and D cannot be used.
Specify the required wetted materials when ordering.
Explosion protection is an order option, not a standard feature of every meter. Confirm the selected Ex marking, applicable approval documents and operating conditions before ordering.
Dimensions
Dimensional reference drawing for the ADDA-FL-CL series.
Body dimensions
Nominal size
A
B
C
D
DN4
Φ83
79
55
75
DN6
Φ83
79
55
75
DN8
Φ83
77
65
75
DN10
Φ83
77
65
75
DN15
Φ113
107
65
75
DN20/DN25
Φ113
107
65
75
DN32/DN40
Φ148
140
82
75
DN50
Φ218
170
100
75
Connection and mounting dimensions
Nominal size
E
F
G
H
DN4
G1/4
40
M6
18
DN6
G3/8
55
M6
16
DN8
G1/2
55
M6
19.5
DN10
G1/2
55
M6
19.5
DN15
G3/4
90
M6
27
DN20/DN25
G3/4
90
M6
27
DN32/DN40
G1
110
M8
35
DN50
G1-1/4
180
M8
45
These are standard-product reference dimensions. Customized dimensions are available for special operating conditions. Confirm the dimensional units and the installation drawing for the ordered configuration.