제품

ADDA-FL-WJ Vortex Flow Meter

SKU ADDA-FL-WJ 카테고리

ADDA-FL-WJ Vortex Flow Meter

호환성 단상 액체,건조 가스 및 증기를 위한 인라인 와류 유량계. DN15–DN300 플랜지형 및 웨이퍼 버전을 사용할 수 있으며,최대 +350°C의 공정 온도 옵션과 옵션 온도 또는 온도 및 압력 보상이 제공됩니다.

권위있는 자격 인증

우리는 ISO 품질 인증, 국가 하이테크 기업 자격, 중국 측정 기기 형식 승인, 폭발 방지 및 안전 인증을 보유하여 신뢰할 수있는 제품 품질을 지원합니다.

맞춤형 엔지니어링

다양한 공정 환경을 위한 구성 가능한 재료, 연결, 신호, 디스플레이 및 설치 솔루션.

Overview | Specifications | Flow Ranges | Dimensions | Installation

Overview

The ADDA-FL-WJ is an inline vortex flow meter based on the Kármán vortex shedding principle. It measures the flow of compatible single-phase liquids, dry gases and steam. Depending on the selected compensation configuration, the transmitter can indicate operating volumetric flow, normalized volumetric flow or calculated mass flow.

Typical applications include petroleum processing, chemical production, power generation and industrial heating. Select the meter size, materials, temperature range and compensation method to match the medium and operating conditions.

Features

  • No moving parts in the measuring body.
  • Flanged and wafer connections from DN15 to DN300.
  • 304 or 316 stainless steel body and probe options.
  • Temperature versions up to +250°C or +350°C.
  • Frequency, scaled pulse, two-wire 4–20 mA, HART and Modbus RTU over RS485 options.
  • Configurations without compensation, with temperature compensation, or with temperature and pressure compensation.

Operating Principle

A fixed bluff body in the flow path generates alternating vortices downstream. Within the specified Reynolds-number range, the vortex shedding frequency is proportional to flow velocity. A piezoelectric or capacitive pickup detects the resulting pressure fluctuations, and the transmitter converts their frequency into flow.

f = St × v / d, where f is vortex shedding frequency, St is the Strouhal number, v is flow velocity and d is the bluff-body width. Volumetric flow is derived from the calibrated meter factor K; frequency and volume units must be consistent when applying Q = f / K.

Vortex shedding diagram showing alternating vortices behind a bluff body
Kármán vortex shedding principle

Technical Specifications

ParameterSpecification
ModelADDA-FL-WJ
Suitable mediaCompatible single-phase liquids, dry gases and steam
Nominal sizeDN15–DN300
Process connectionsFlanged or wafer
Body material304 or 316 stainless steel
Probe material304 or 316 stainless steel
Process temperatureStandard/medium-temperature version: −40 to +250°C; high-temperature version: −40 to +350°C
Nominal pressurePN10–PN63, depending on configuration
Accuracy classes1.0 or 1.5 for gas and liquid service
RepeatabilityBetter than one third of the absolute maximum permissible error for the selected accuracy class
Ambient temperature−10 to +55°C
Relative humidity5–90%
Atmospheric pressure86–106 kPa
Power supply24 V DC nominal (18–29 V DC); 3.6 V lithium battery; or 24 V DC with 3.6 V battery, depending on configuration
Output optionsFrequency; scaled pulse; two-wire 4–20 mA; Modbus RTU over RS485; HART
Ingress protectionIP65
Referenced product standardJB/T 9249-2015, Vortex Flow Sensors
Referenced verification regulationJJG 1029-2007, Vortex Flowmeters

Required compensation, output and power options must be selected together. Operating limits depend on medium density, Reynolds number, meter size and process conditions. The catalogue specifies a minimum Reynolds number of 5,000; confirm the selected operating range before ordering.

Liquid Flow Sizing

The tables show the lower measurable flow for different liquid densities. All flow values are in m³/h. The reference-flow column is reproduced for sizing comparison; it is not a normalized gas-volume unit.

Liquid minimum measurable flow at the stated density (m³/h) — Part 1 of 2
Size500 kg/m³600 kg/m³700 kg/m³
DN150.570.520.48
DN200.850.770.72
DN251.271.161.08
DN322.121.941.79
DN403.252.972.75
DN504.954.524.18
DN658.497.757.17
DN80131211
DN100201817
DN125312826
DN150454138
DN200817468
DN250126115106
DN300180164152
Liquid minimum measurable flow at the stated density (m³/h) — Part 2 of 2
Size800 kg/m³900 kg/m³Reference flow
DN150.450.424
DN200.670.636
DN251.010.959
DN321.681.5815
DN402.572.4223
DN503.913.6935
DN656.716.3260
DN80109.4990
DN1001615140
DN1252523220
DN1503634320
DN2006460570
DN25010094890
DN3001421341270
Liquid minimum measurable flow at the stated density (m³/h) — Part 1 of 2
Size1000 kg/m³1200 kg/m³1400 kg/m³
DN150.40.370.34
DN200.60.550.51
DN250.90.820.76
DN321.51.371.27
DN402.32.101.94
DN503.53.202.96
DN6565.485.07
DN8098.227.61
DN100141312
DN125222019
DN150322927
DN200575248
DN250898175
DN300127116107
Liquid minimum measurable flow at the stated density (m³/h) — Part 2 of 2
Size1600 kg/m³1800 kg/m³Reference flow
DN150.320.304
DN200.470.456
DN250.710.679
DN321.191.1215
DN401.821.7123
DN502.772.6135
DN654.744.4760
DN807.126.7190
DN100—10140
DN1251716220
DN1502524320
DN2004542570
DN2507066890
DN300100951270

“—” means the value must be confirmed on request.

Gas Flow Sizing

The gas lower limit depends strongly on density at the measurement conditions. Use the actual gas composition, pressure and temperature when selecting a size and compensation configuration.

Gas minimum measurable flow at the stated density (m³/h) — Part 1 of 3
Size0.5 kg/m³0.8 kg/m³1.2 kg/m³
DN15975
DN20975.5
DN2514119
DN32231815
DN40342722
DN50544335
DN65937460
DN8014011090
DN100217172140
DN125342270220
DN150466368300
DN200854675550
DN25013971105900
DN300201815951300
Gas minimum measurable flow at the stated density (m³/h) — Part 2 of 3
Size2.4 kg/m³3.6 kg/m³4.8 kg/m³
DN153.52.92.5
DN203.93.22.8
DN256.45.24.5
DN32118.77.5
DN40161311
DN50252018
DN65433530
DN80645245
DN100998170
DN125156127110
DN150213174150
DN200390318276
DN250638521451
DN300921752651
Gas minimum measurable flow at the stated density (m³/h) — Part 3 of 3
SizeReference flow
DN1530
DN2067
DN2590
DN32150
DN40220
DN50350
DN65600
DN80900
DN1001400
DN1252200
DN1503000
DN2005500
DN2509000
DN30013000
Gas minimum measurable flow at the stated density (m³/h) — Part 1 of 3
Size6.0 kg/m³7.2 kg/m³8.4 kg/m³
DN152.22.01.9
DN202.52.32.1
DN254.03.73.4
DN326.76.15.7
DN409.99.08.3
DN50161413
DN65272523
DN80403734
DN100635753
DN125999083
DN150134123114
DN200246225208
DN250403368341
DN300583532492
Gas minimum measurable flow at the stated density (m³/h) — Part 2 of 3
Size9.6 kg/m³12.0 kg/m³20.0 kg/m³
DN151.81.61.2
DN201.91.71.4
DN253.22.92.2
DN325.34.83.7
DN407.87.05.4
DN501211.18.6
DN65211915
DN80322922
DN100504434
DN125787254
DN1501069574
DN200195174135
DN250319285221
DN300461412319
Gas minimum measurable flow at the stated density (m³/h) — Part 3 of 3
SizeReference flow
DN1530
DN2067
DN2590
DN32150
DN40220
DN50350
DN65600
DN80900
DN1001400
DN1252200
DN1503000
DN2005500
DN2509000
DN30013000

Selection Options

Selection코드옵션
ConnectionF1Flanged
ConnectionF2Wafer
CompensationN0Without temperature or pressure compensation
CompensationWDTemperature compensation
CompensationWYTemperature and pressure compensation
Temperature versionC−40 to +250°C
Temperature versionG−40 to +350°C
Probe material4304 stainless steel
Probe material6316 stainless steel
Body material4304 stainless steel
Body material6316 stainless steel
OutputPFrequency
OutputMScaled pulse
OutputFTwo-wire 4–20 mA
OutputHTwo-wire 4–20 mA + HART
OutputRModbus RTU over RS485
Electrical connectionMM20 × 1.5
Electrical connectionN1/2 NPT
Hazardous-area requirementNNon-explosion-protected version
Hazardous-area requirementDFlameproof version; confirm marking and applicable certification for the supplied configuration

Specify the nominal size, pressure rating, process medium, operating flow, pressure and temperature, required accuracy and power supply. Confirm compatible options and the final configuration before ordering.

Dimensions

Dimensions are in millimetres unless otherwise stated. Confirm the final drawing and pressure rating for the ordered meter.

Flanged Version

Insertion vortex flow meter probe and pipe mounting dimensions
Flanged version, side view
Remote vortex flow meter with cable-linked transmitter and flange dimensions
Flanged version, end view
PN10 flanged dimensions — Part 1 of 3
DNRatingStandard LAvailable L range
15PN10200200–250
20PN10200200–250
25PN10200200–250
32PN10200200–250
40PN10200200–250
50PN10200200–250
65PN10200200–250
80PN10200200–250
100PN10220220–250
125PN10220220–280
150PN10220220–280
200PN10270270–300
250PN10310310–350
300PN10350350–350
PN10 flanged dimensions — Part 2 of 3
DNDKn–d holes
1595654-14
20105754-14
25115854-14
321401004-18
401501104-18
501651254-18
651851458-18
802001608-18
1002201808-18
1252502108-18
1502852408-22
20034029512-22
25040535512-26
30046041012-26
PN10 flanged dimensions — Part 3 of 3
DNBolt size
15M12×60
20M12×60
25M12×60
32M16×70
40M16×70
50M16×70
65M16×70
80M16×70
100M16×70
125M16×70
150M20×100
200M20×100
250M24×100
300M24×100

The listed flange dimensions are for PN10. Other pressure ratings require a confirmed dimensional drawing. K is the bolt-circle diameter; n–d states the number and diameter of bolt holes.

Wafer Version

Remote vortex flow meter side and end dimensional views
Wafer version dimensions
DNLength LOutside diameter DConnecting pipe OD × wall thickness
158587Ø18 × 2
208587Ø25 × 3
258587Ø32 × 3
328587Ø38 × 3
4085100Ø45 × 3
5085100Ø57 × 3.5
6590120—
8095136—
100110149Ø108 × 4
125110175Ø133 × 4
150130203Ø159 × 4.5
200150259Ø219 × 6
250180312Ø273 × 6.5
300200363Ø325 × 8

“—” means the connecting-pipe specification must be confirmed on request.

Installation Requirements

Layout or componentRequirement
Reducer, expander or elbow upstreamProvide at least 15D of straight pipe upstream and 5D downstream. D is the nominal internal diameter of the meter.
Control valve downstreamInstall control valves downstream where possible, retaining at least 5D between the meter and valve. Upstream straight length depends on preceding fittings.
Control valve upstreamIf unavoidable, provide at least 25D upstream and 5D downstream.
Piston or plunger pumpUse a suitable upstream accumulator or pulsation damper to reduce liquid pulsations.
Pulsating gas or liquid flowPulsation from reciprocating pumps, blowers or compressors can disturb measurement. Select an upstream damping arrangement and verify the layout.
Tee branch with intermittent flowA closed downstream valve can leave the meter exposed to pressure pulsations from the live branch. An appropriately located upstream isolation valve may be needed to isolate the inactive meter branch.
Pressure tappingLocate the pressure measurement point 3–5D downstream of the meter.
Temperature tappingLocate the temperature measurement point 6–8D downstream of the meter.
VibrationChoose a low-vibration location; support the pipeline where necessary.
Pipe boreThe catalogue specifies a connecting-pipe internal diameter 1–5 mm larger than the meter bore. Confirm the selected mating pipe dimensions.
AssemblyAlign the meter and pipe concentrically. Flush pipework to remove welding debris and other foreign material before installing the meter.

Gas and Steam Service

Prevent condensate from collecting in the measuring section. Vertical mounting or a suitable high-point arrangement in horizontal piping can help avoid liquid accumulation. Do not locate the meter at the bottom of a U-shaped section where condensate can collect.

Liquid Service

Keep the measuring tube completely full. Upward flow is preferred in vertical pipework. Where downward flow is used, position the meter below the downstream pipe elevation so the measuring section remains flooded. Avoid high points where gas can collect, and place the meter upstream of a control valve where a pressure drop could create bubbles.

Entrained gas, stratified flow and other mixed-phase conditions can impair accuracy or prevent reliable measurement. Confirm single-phase service and a suitable installation layout before commissioning.

관련 제품

케이스 쇼케이스

자주 묻는 질문

ADDA 산업용 측정 기기에 대한 제품 선택, 사용자 정의, 기술 매개변수, 납품 및 지원에 대한 빠른 답변을 찾아보세요.

官网익수

측정된 매체, 측정 범위, 공정 온도, 공정 압력, 연결 유형, 출력 신호, 전원 공급 장치, 설치 환경 및 원격 모니터링이 필요한 경우 통신 방법을 제공하십시오.

예. ADDA 는 측정 범위,공정 연결,습윤 재료,디스플레이 유형,통신 프로토콜,설치 방법 및 작업 환경을 기반으로 맞춤형 솔루션을 제공할 수 있습니다.

많은 ADDA 계측기는 방폭 또는 본질 안전 구성으로 제공됩니다. 선택하기 전에 사이트 분류 및 인증 요구 사항을 확인하십시오.

예. 저희 팀은 중간,범위, 연결,출력 신호 및 설치 요구 사항을 포함한 응용 조건을 검토한 후 적합한 기기 구성을 추천하는 데 도움을 드릴 수 있습니다.

리드타임은 제품 유형, 수량, 사용자 정의 요구 사항 및 인증 요구 사항에 따라 다릅니다. 표준 제품은 일반적으로 배송 시간이 더 짧고 사용자 정의 모델에는 추가 생산 시간이 필요할 수 있습니다.

협력을 위해 문의하세요

官网익수