संगत एकल-चरण तरल पदार्थ, सूखी गैसों और भाप के लिए इनलाइन भंवर प्रवाह मीटर डीएन १५ एसओडीएन ३०० फ्लैंगेड और वेफर संस्करण उपलब्ध हैं, + ३५० डिग्री सेल्सियस तक प्रक्रिया-तापमान विकल्प और वैकल्पिक तापमान या तापमान-और-दबाव मुआवजे के साथ।.
आधिकारिक योग्यता प्रमाणपत्र
हम आईएसओ गुणवत्ता प्रमाणन, राष्ट्रीय उच्च तकनीक उद्यम योग्यता, चीन मापने उपकरण प्रकार अनुमोदन, और विस्फोट प्रूफ और सुरक्षा प्रमाण पत्र विश्वसनीय उत्पाद की गुणवत्ता का समर्थन करने के लिए।.
कस्टम इंजीनियरिंग
विभिन्न प्रक्रिया वातावरणों के लिए कॉन्फ़िगर करने योग्य सामग्री, कनेक्शन, सिग्नल, डिस्प्ले और इंस्टॉलेशन समाधान।.
The ADDA-FL-WJ is an inline vortex flow meter based on the Kármán vortex shedding principle. It measures the flow of compatible single-phase liquids, dry gases and steam. Depending on the selected compensation configuration, the transmitter can indicate operating volumetric flow, normalized volumetric flow or calculated mass flow.
Typical applications include petroleum processing, chemical production, power generation and industrial heating. Select the meter size, materials, temperature range and compensation method to match the medium and operating conditions.
विशेषताएं
No moving parts in the measuring body.
Flanged and wafer connections from DN15 to DN300.
304 or 316 stainless steel body and probe options.
Temperature versions up to +250°C or +350°C.
Frequency, scaled pulse, two-wire 4–20 mA, HART and Modbus RTU over RS485 options.
Configurations without compensation, with temperature compensation, or with temperature and pressure compensation.
ऑपरेटिंग सिद्धांत
A fixed bluff body in the flow path generates alternating vortices downstream. Within the specified Reynolds-number range, the vortex shedding frequency is proportional to flow velocity. A piezoelectric or capacitive pickup detects the resulting pressure fluctuations, and the transmitter converts their frequency into flow.
f = St × v / d, where f is vortex shedding frequency, St is the Strouhal number, v is flow velocity and d is the bluff-body width. Volumetric flow is derived from the calibrated meter factor K; frequency and volume units must be consistent when applying Q = f / K.
Kármán vortex shedding principle
तकनीकी विनिर्देश
पैरामीटर
विशिष्टता
Model
ADDA-FL-WJ
Suitable media
Compatible single-phase liquids, dry gases and steam
नाममात्र आकार
DN15–DN300
Process connections
Flanged or wafer
Body material
304 or 316 stainless steel
Probe material
304 or 316 stainless steel
Process temperature
Standard/medium-temperature version: −40 to +250°C; high-temperature version: −40 to +350°C
Nominal pressure
PN10–PN63, depending on configuration
Accuracy classes
1.0 or 1.5 for gas and liquid service
Repeatability
Better than one third of the absolute maximum permissible error for the selected accuracy class
Ambient temperature
−10 to +55°C
Relative humidity
5–90%
Atmospheric pressure
86–106 kPa
बिजली की आपूर्ति
24 V DC nominal (18–29 V DC); 3.6 V lithium battery; or 24 V DC with 3.6 V battery, depending on configuration
Required compensation, output and power options must be selected together. Operating limits depend on medium density, Reynolds number, meter size and process conditions. The catalogue specifies a minimum Reynolds number of 5,000; confirm the selected operating range before ordering.
Liquid Flow Sizing
The tables show the lower measurable flow for different liquid densities. All flow values are in m³/h. The reference-flow column is reproduced for sizing comparison; it is not a normalized gas-volume unit.
Liquid minimum measurable flow at the stated density (m³/h) — Part 1 of 2
Size
500 kg/m³
600 kg/m³
700 kg/m³
DN15
0.57
0.52
0.48
DN20
0.85
0.77
0.72
डीएन25
1.27
1.16
1.08
DN32
2.12
1.94
1.79
डीएन40
3.25
2.97
2.75
डीएन50
4.95
4.52
4.18
DN65
8.49
7.75
7.17
डीएन80
13
12
11
डीएन100
20
18
17
DN125
31
28
26
डीएन150
45
41
38
डीएन200
81
74
68
डीएन250
126
115
106
DN300
180
164
152
Liquid minimum measurable flow at the stated density (m³/h) — Part 2 of 2
Size
800 kg/m³
900 kg/m³
Reference flow
DN15
0.45
0.42
4
DN20
0.67
0.63
6
डीएन25
1.01
0.95
9
DN32
1.68
1.58
15
डीएन40
2.57
2.42
23
डीएन50
3.91
3.69
35
DN65
6.71
6.32
60
डीएन80
10
9.49
90
डीएन100
16
15
140
DN125
25
23
220
डीएन150
36
34
320
डीएन200
64
60
570
डीएन250
100
94
890
DN300
142
134
1270
Liquid minimum measurable flow at the stated density (m³/h) — Part 1 of 2
Size
1000 kg/m³
1200 kg/m³
1400 kg/m³
DN15
0.4
0.37
0.34
DN20
0.6
0.55
0.51
डीएन25
0.9
0.82
0.76
DN32
1.5
1.37
1.27
डीएन40
2.3
2.10
1.94
डीएन50
3.5
3.20
2.96
DN65
6
5.48
5.07
डीएन80
9
8.22
7.61
डीएन100
14
13
12
DN125
22
20
19
डीएन150
32
29
27
डीएन200
57
52
48
डीएन250
89
81
75
DN300
127
116
107
Liquid minimum measurable flow at the stated density (m³/h) — Part 2 of 2
Size
1600 kg/m³
1800 kg/m³
Reference flow
DN15
0.32
0.30
4
DN20
0.47
0.45
6
डीएन25
0.71
0.67
9
DN32
1.19
1.12
15
डीएन40
1.82
1.71
23
डीएन50
2.77
2.61
35
DN65
4.74
4.47
60
डीएन80
7.12
6.71
90
डीएन100
—
10
140
DN125
17
16
220
डीएन150
25
24
320
डीएन200
45
42
570
डीएन250
70
66
890
DN300
100
95
1270
“—” means the value must be confirmed on request.
Gas Flow Sizing
The gas lower limit depends strongly on density at the measurement conditions. Use the actual gas composition, pressure and temperature when selecting a size and compensation configuration.
Gas minimum measurable flow at the stated density (m³/h) — Part 1 of 3
Size
0.5 kg/m³
0.8 kg/m³
1.2 kg/m³
DN15
9
7
5
DN20
9
7
5.5
डीएन25
14
11
9
DN32
23
18
15
डीएन40
34
27
22
डीएन50
54
43
35
DN65
93
74
60
डीएन80
140
110
90
डीएन100
217
172
140
DN125
342
270
220
डीएन150
466
368
300
डीएन200
854
675
550
डीएन250
1397
1105
900
DN300
2018
1595
1300
Gas minimum measurable flow at the stated density (m³/h) — Part 2 of 3
Size
2.4 kg/m³
3.6 kg/m³
4.8 kg/m³
DN15
3.5
2.9
2.5
DN20
3.9
3.2
2.8
डीएन25
6.4
5.2
4.5
DN32
11
8.7
7.5
डीएन40
16
13
11
डीएन50
25
20
18
DN65
43
35
30
डीएन80
64
52
45
डीएन100
99
81
70
DN125
156
127
110
डीएन150
213
174
150
डीएन200
390
318
276
डीएन250
638
521
451
DN300
921
752
651
Gas minimum measurable flow at the stated density (m³/h) — Part 3 of 3
Size
Reference flow
DN15
30
DN20
67
डीएन25
90
DN32
150
डीएन40
220
डीएन50
350
DN65
600
डीएन80
900
डीएन100
1400
DN125
2200
डीएन150
3000
डीएन200
5500
डीएन250
9000
DN300
13000
Gas minimum measurable flow at the stated density (m³/h) — Part 1 of 3
Size
6.0 kg/m³
7.2 kg/m³
8.4 kg/m³
DN15
2.2
2.0
1.9
DN20
2.5
2.3
2.1
डीएन25
4.0
3.7
3.4
DN32
6.7
6.1
5.7
डीएन40
9.9
9.0
8.3
डीएन50
16
14
13
DN65
27
25
23
डीएन80
40
37
34
डीएन100
63
57
53
DN125
99
90
83
डीएन150
134
123
114
डीएन200
246
225
208
डीएन250
403
368
341
DN300
583
532
492
Gas minimum measurable flow at the stated density (m³/h) — Part 2 of 3
Size
9.6 kg/m³
12.0 kg/m³
20.0 kg/m³
DN15
1.8
1.6
1.2
DN20
1.9
1.7
1.4
डीएन25
3.2
2.9
2.2
DN32
5.3
4.8
3.7
डीएन40
7.8
7.0
5.4
डीएन50
12
11.1
8.6
DN65
21
19
15
डीएन80
32
29
22
डीएन100
50
44
34
DN125
78
72
54
डीएन150
106
95
74
डीएन200
195
174
135
डीएन250
319
285
221
DN300
461
412
319
Gas minimum measurable flow at the stated density (m³/h) — Part 3 of 3
Size
Reference flow
DN15
30
DN20
67
डीएन25
90
DN32
150
डीएन40
220
डीएन50
350
DN65
600
डीएन80
900
डीएन100
1400
DN125
2200
डीएन150
3000
डीएन200
5500
डीएन250
9000
DN300
13000
Selection Options
चयन
कोड
विकल्प
Connection
F1
Flanged
Connection
F2
Wafer
Compensation
N0
Without temperature or pressure compensation
Compensation
WD
Temperature compensation
Compensation
WY
Temperature and pressure compensation
Temperature version
C
−40 to +250°C
Temperature version
G
−40 to +350°C
Probe material
4
304 स्टेनलेस स्टील
Probe material
6
316 stainless steel
Body material
4
304 स्टेनलेस स्टील
Body material
6
316 stainless steel
आउटपुट
P
Frequency
आउटपुट
M
Scaled pulse
आउटपुट
F
दो-तार 4,20 एमए
आउटपुट
H
Two-wire 4–20 mA + HART
आउटपुट
R
Modbus RTU over RS485
विद्युत कनेक्शन
M
M20 × 1.5
विद्युत कनेक्शन
N
1/2 NPT
Hazardous-area requirement
N
Non-explosion-protected version
Hazardous-area requirement
D
Flameproof version; confirm marking and applicable certification for the supplied configuration
Specify the nominal size, pressure rating, process medium, operating flow, pressure and temperature, required accuracy and power supply. Confirm compatible options and the final configuration before ordering.
आयाम
Dimensions are in millimetres unless otherwise stated. Confirm the final drawing and pressure rating for the ordered meter.
Flanged Version
Flanged version, side viewFlanged version, end view
PN10 flanged dimensions — Part 1 of 3
DN
Rating
Standard L
Available L range
15
PN10
200
200–250
20
PN10
200
200–250
25
PN10
200
200–250
32
PN10
200
200–250
40
PN10
200
200–250
50
PN10
200
200–250
65
PN10
200
200–250
80
PN10
200
200–250
100
PN10
220
220–250
125
PN10
220
220–280
150
PN10
220
220–280
200
PN10
270
270–300
250
PN10
310
310–350
300
PN10
350
350–350
PN10 flanged dimensions — Part 2 of 3
DN
D
K
n–d holes
15
95
65
4-14
20
105
75
4-14
25
115
85
4-14
32
140
100
4-18
40
150
110
4-18
50
165
125
4-18
65
185
145
8-18
80
200
160
8-18
100
220
180
8-18
125
250
210
8-18
150
285
240
8-22
200
340
295
12-22
250
405
355
12-26
300
460
410
12-26
PN10 flanged dimensions — Part 3 of 3
DN
Bolt size
15
M12×60
20
M12×60
25
M12×60
32
M16×70
40
M16×70
50
M16×70
65
M16×70
80
M16×70
100
M16×70
125
M16×70
150
M20×100
200
M20×100
250
M24×100
300
M24×100
The listed flange dimensions are for PN10. Other pressure ratings require a confirmed dimensional drawing. K is the bolt-circle diameter; n–d states the number and diameter of bolt holes.
Wafer Version
Wafer version dimensions
DN
Length L
Outside diameter D
Connecting pipe OD × wall thickness
15
85
87
Ø18 × 2
20
85
87
Ø25 × 3
25
85
87
Ø32 × 3
32
85
87
Ø38 × 3
40
85
100
Ø45 × 3
50
85
100
Ø57 × 3.5
65
90
120
—
80
95
136
—
100
110
149
Ø108 × 4
125
110
175
Ø133 × 4
150
130
203
Ø159 × 4.5
200
150
259
Ø219 × 6
250
180
312
Ø273 × 6.5
300
200
363
Ø325 × 8
“—” means the connecting-pipe specification must be confirmed on request.
Installation Requirements
Layout or component
Requirement
Reducer, expander or elbow upstream
Provide at least 15D of straight pipe upstream and 5D downstream. D is the nominal internal diameter of the meter.
Control valve downstream
Install control valves downstream where possible, retaining at least 5D between the meter and valve. Upstream straight length depends on preceding fittings.
Control valve upstream
If unavoidable, provide at least 25D upstream and 5D downstream.
Piston or plunger pump
Use a suitable upstream accumulator or pulsation damper to reduce liquid pulsations.
Pulsating gas or liquid flow
Pulsation from reciprocating pumps, blowers or compressors can disturb measurement. Select an upstream damping arrangement and verify the layout.
Tee branch with intermittent flow
A closed downstream valve can leave the meter exposed to pressure pulsations from the live branch. An appropriately located upstream isolation valve may be needed to isolate the inactive meter branch.
Pressure tapping
Locate the pressure measurement point 3–5D downstream of the meter.
Temperature tapping
Locate the temperature measurement point 6–8D downstream of the meter.
Vibration
Choose a low-vibration location; support the pipeline where necessary.
Pipe bore
The catalogue specifies a connecting-pipe internal diameter 1–5 mm larger than the meter bore. Confirm the selected mating pipe dimensions.
Assembly
Align the meter and pipe concentrically. Flush pipework to remove welding debris and other foreign material before installing the meter.
Gas and Steam Service
Prevent condensate from collecting in the measuring section. Vertical mounting or a suitable high-point arrangement in horizontal piping can help avoid liquid accumulation. Do not locate the meter at the bottom of a U-shaped section where condensate can collect.
Liquid Service
Keep the measuring tube completely full. Upward flow is preferred in vertical pipework. Where downward flow is used, position the meter below the downstream pipe elevation so the measuring section remains flooded. Avoid high points where gas can collect, and place the meter upstream of a control valve where a pressure drop could create bubbles.
Entrained gas, stratified flow and other mixed-phase conditions can impair accuracy or prevent reliable measurement. Confirm single-phase service and a suitable installation layout before commissioning.
यदि दूरस्थ निगरानी की आवश्यकता है तो कृपया मापा माध्यम, मापने की सीमा, प्रक्रिया तापमान, प्रक्रिया दबाव, कनेक्शन प्रकार, आउटपुट सिग्नल, बिजली आपूर्ति, स्थापना वातावरण और संचार विधि प्रदान करें।.
हाँ। ADDA रेंज, प्रक्रिया कनेक्शन, गीली सामग्री, प्रदर्शन प्रकार, संचार प्रोटोकॉल, स्थापना विधि और कार्य वातावरण को मापने के आधार पर अनुकूलित समाधान प्रदान कर सकता है।.
कई एडीडीए उपकरण विस्फोट-सबूत या आंतरिक रूप से सुरक्षित कॉन्फ़िगरेशन के साथ उपलब्ध हैं कृपया चयन से पहले साइट वर्गीकरण और प्रमाणन आवश्यकताओं की पुष्टि करें।.
हाँ। हमारी टीम माध्यम, रेंज, कनेक्शन, आउटपुट सिग्नल और इंस्टॉलेशन आवश्यकताओं सहित आपकी एप्लिकेशन स्थितियों की समीक्षा करने के बाद एक उपयुक्त उपकरण कॉन्फ़िगरेशन की सिफारिश करने में मदद कर सकती है।.
लीड समय उत्पाद प्रकार, मात्रा, अनुकूलन आवश्यकताओं और प्रमाणन आवश्यकताओं पर निर्भर करता है मानक उत्पादों में आमतौर पर कम वितरण समय होता है, जबकि अनुकूलित मॉडल को अतिरिक्त उत्पादन समय की आवश्यकता हो सकती है।.