منتجات

ADDA-FL-DC مقياس التدفق الكهرومغناطيسي

SKU ADDA-FL-DC فئة

ADDA-FL-DC مقياس التدفق الكهرومغناطيسي

مقياس التدفق الكهرومغناطيسي المتكامل أو البعيد للسوائل الموصلة ذات الموصلية ≥5 ميكروثانية/سم. متوفر بوصلات ذات حواف أو ملولبة أو مشبكية، ومواد مبللة قابلة للتحديد، ومخرجات اتصالات نبضية أو حالية أو رقمية.

شهادات التأهيل الرسمية

نحن حاصلون على شهادة الجودة ISO، ومؤهلات المؤسسات الوطنية عالية التقنية، والموافقة على نوع أداة القياس الصينية، وشهادات مقاومة الانفجار والسلامة لدعم جودة المنتج الموثوقة.

الهندسة المخصصة

مواد قابلة للتكوين، واتصالات، وإشارات، وشاشات عرض، وحلول تثبيت لبيئات العمليات المختلفة.

نظرة عامة | مواصفات | أبعاد | تثبيت

Electromagnetic Flow Measurement

The ADDA-FL-DC measures the volumetric flow of conductive liquids using Faraday’s law of electromagnetic induction. The system consists of a flow sensor and a converter, with integral and remote configurations available. Electrodes detect the voltage generated as the liquid passes through the magnetic field.

سمات

  • Unobstructed measuring tube with no moving flow-restricting components.
  • Accuracy grades of 1.0, 0.5 and 0.2, selected to suit the application.
  • Electrode, liner and body material options for different conductive liquids.
  • Pulse, frequency, 4–20 mA, optional HART, and Modbus RTU over RS485 output options.

التطبيقات

Suitable applications include power generation, metallurgy, chemical processing, petroleum and petrochemical processes, municipal water systems, environmental treatment, food processing and pharmaceutical production. Select the wetted materials, lining, connections and temperature rating for the actual medium and operating conditions.

مبدأ التشغيل

The induced voltage is proportional to liquid velocity when the magnetic field and pipe diameter are fixed. The catalogue expresses this relationship as E = B × V × D, where E is induced voltage, B is magnetic flux density, V is mean liquid velocity and D is the internal pipe diameter. Volumetric flow is Q = V × πD² / 4.

Electromagnetic flow measurement diagram with magnetic field and electrodes
Electromagnetic measurement principle

المواصفات الفنية

معلمةتخصيص
Applicable mediumConductive liquids with conductivity ≥5 μS/cm
Product standard listed in the catalogueJB/T 9248-2015
Body and flange materialsCarbon steel, 304 stainless steel or 316 stainless steel
Threaded connection sizesDN15–DN50
Flanged connection sizesDN4–DN300
Clamp connection sizesDN15–DN100
Medium temperature−20°C to +150°C; actual limits depend on lining and configuration
Ambient temperature−20°C to +55°C
Ambient relative humidity5%–95%
Accuracy grades1.0, 0.5 or 0.2
RepeatabilityBetter than one third of the absolute maximum permissible error for the selected accuracy grade
مصدر طاقة24 VDC (20–36 V) or 220 VAC (90–250 V)
Signal outputsPulse; frequency; 4–20 mA; 4–20 mA + HART; Modbus RTU RS485
خيارات حماية الضميمةIP65, IP67 or IP68, depending on the selected configuration

Liner Temperature Limits

The liner limit does not override the complete meter’s specified operating limit. Confirm the usable temperature range for the selected assembly.

LinerRemote configurationIntegral configuration
PTFE or PFA−30°C to +150°Cمن -30°C إلى +80°C
F46−30°C to +100°Cمن -30°C إلى +80°C
Neoprene−15°C to +80°C−15°C to +80°C
Polyurethane−15°C to +60°C−15°C to +60°C

Pressure Ratings by Connection

Pressure ratings are connection- and size-dependent. A dash indicates that the connection is not listed for that size.

Pressure Ratings by Connection — Threaded PN and Flanged PN
الحجم الاسميThreaded PNFlanged PN
DN4—10~40
DN6—10~40
DN10—10~40
DN151610~160
DN201610~160
DN251610~160
DN321610~160
DN401610~160
DN501610~160
DN65—10~160
DN80—10~160
DN100—10~160
DN125—10~160
DN150—10~160
DN200—10~40
DN250—10~40
DN300—10~40
Pressure Ratings by Connection — Flanged Class and Clamp PN
الحجم الاسميFlanged ClassClamp PN
DN4——
DN6——
DN10——
DN15150~90010
DN20150~90010
DN25150~90010
DN32150~90010
DN40150~90010
DN50150~90010
DN65150~90010
DN80150~90010
DN100150~90010
DN125150~900—
DN150150~900—
DN200150~300—
DN250150~300—
DN300150~300—

Configuration Options

عنصرAvailable options
بناءIntegral or remote
Electrode materials316L, HC, titanium, tantalum, platinum or tungsten carbide
LiningNeoprene, polyurethane, PTFE, F46 or PFA
Body materialsCarbon steel, 304 stainless steel or 316 stainless steel
Electrical entriesM20 × 1.5 or 1/2 NPT
Grounding arrangementsNo grounding ring, grounding ring or grounding electrode; grounding electrode material matches the measuring electrode material
خيار المنطقة الخطرةFlameproof option listed as Exdb IIC T6 Gb; a non-explosion-protected option is also listed. Confirm the applicable marking and documentation for the ordered configuration.

Specify the required flange standard and sealing face, or the thread or clamp dimensions, when ordering.

Flanged Dimensions

Dimensions below are in millimetres and apply to the PN10 flange arrangement shown.

Electromagnetic flow meter transmitter and flange dimensions
Integral flanged meter dimensions
Flanged electromagnetic flow meter side and end dimensional views
Remote sensor dimensions
PN10 flanged dimensions in mm
الحجم الاسميLDKn × d
420090604×φ14
620090604×φ14
1020090604×φ14
1520095654×φ14
20200105754×φ14
25200115854×φ14
322001401004×φ18
402001501104×φ18
502001651254×φ18
652001851458×φ18
802002001608×φ18
1002502201808×φ18
1252502502108×φ18
1503002852408×φ22
2003503402958×φ22
25045039535012×φ22
30050044540012×φ22

Clamp Dimensions

Compact electromagnetic flow meter dimensional drawing
Clamp connection dimensions
Clamp dimensions in mm — Part 1 of 2
الحجم الاسميLDA
1520010834
2020010834
2520010850.5
3220010850.5
4025012664
5025015164
6525015177.5
8025020191
100250201119
Clamp dimensions in mm — Part 2 of 2
الحجم الاسميBb
1527.512.7
2027.517.2
2543.522.6
3243.531.3
4056.537.6
5056.548.6
6570.560.3
8083.572.9
10011097.6

Threaded Dimensions

Threaded electromagnetic flow meter body and transmitter dimensions
Threaded connection dimensions
Threaded dimensions in mm
الحجم الاسميLDThread G
15200108G1/2
20200108G3/4
25200108G1
32200108G1 1/4
40250126G1 1/2
50250151G2

إرشادات التثبيت

Upstream disturbanceUpstream straight lengthDownstream straight length
Two-dimensional bend5 × DN2 × DN
Three-dimensional bend10 × DN2 × DN
Tee10 × DN2 × DN
  • Keep the measuring tube full. Prefer a low point or rising pipe section; avoid high points where air can accumulate.
  • Avoid a vertical arrangement discharging directly to an open outlet unless back pressure is controlled.
  • Prefer installation downstream of a pump after flow disturbances have subsided, and upstream of a control valve. Avoid cavitation.
  • If the drop to the discharge valve exceeds 5 m, provide a vent at the highest point above the flow meter as shown in the installation design.
  • Align the converter above or below the pipe axis. Keep mating flanges parallel; the catalogue specifies Lmax − Lmin < 0.5 mm for flange-face misalignment.
  • Ground the meter according to the applicable installation requirements.

المنتجات ذات الصلة

معرض القضية

الأسئلة المتداولة

ابحث عن إجابات سريعة حول اختيار المنتج، والتخصيص، والمعلمات الفنية، والتسليم، ودعم أدوات القياس الصناعية ADDA.

官网询盘

يرجى تقديم الوسيط المقاس ونطاق القياس ودرجة حرارة العملية وضغط العملية ونوع الاتصال وإشارة الخرج وإمدادات الطاقة وبيئة التثبيت وطريقة الاتصال إذا كانت المراقبة عن بعد مطلوبة.

نعم. يمكن لـ ADDA توفير حلول مخصصة تعتمد على نطاق القياس، واتصال العملية، والمواد المبللة، ونوع العرض، وبروتوكول الاتصال، وطريقة التثبيت، وبيئة العمل.

تتوفر العديد من أدوات ADDA بتكوينات مقاومة للانفجار أو آمنة بشكل جوهري. يرجى تأكيد تصنيف الموقع ومتطلبات الاعتماد قبل الاختيار.

نعم. يمكن لفريقنا المساعدة في التوصية بتكوين مناسب للأداة بعد مراجعة شروط التطبيق الخاصة بك، بما في ذلك متطلبات المتوسط والمدى والاتصال وإشارة الخرج والتركيب.

تعتمد المهلة الزمنية على نوع المنتج والكمية ومتطلبات التخصيص واحتياجات إصدار الشهادات. عادةً ما يكون للمنتجات القياسية وقت تسليم أقصر، بينما قد تتطلب النماذج المخصصة وقتًا إضافيًا للإنتاج.

اتصل بنا للتعاون

官网询盘