उत्पादों

ADDA-FL-DC विद्युत चुम्बकीय प्रवाह मीटर

एसकेयू ADDA-FL-DC श्रेणी

ADDA-FL-DC विद्युत चुम्बकीय प्रवाह मीटर

चालकता ≥५ μS/सेमी के साथ प्रवाहकीय तरल पदार्थ के लिए इंटीग्रल या रिमोट इलेक्ट्रोमैग्नेटिक फ्लो मीटर फ़्लैंग्ड, थ्रेडेड या क्लैंप कनेक्शन, चयन योग्य गीली सामग्री, और पल्स, वर्तमान या डिजिटल संचार आउटपुट के साथ उपलब्ध है।.

आधिकारिक योग्यता प्रमाणपत्र

हम आईएसओ गुणवत्ता प्रमाणन, राष्ट्रीय उच्च तकनीक उद्यम योग्यता, चीन मापने उपकरण प्रकार अनुमोदन, और विस्फोट प्रूफ और सुरक्षा प्रमाण पत्र विश्वसनीय उत्पाद की गुणवत्ता का समर्थन करने के लिए।.

कस्टम इंजीनियरिंग

विभिन्न प्रक्रिया वातावरणों के लिए कॉन्फ़िगर करने योग्य सामग्री, कनेक्शन, सिग्नल, डिस्प्ले और इंस्टॉलेशन समाधान।.

अवलोकन | निर्दिष्टीकरण | आयाम | Installation

Electromagnetic Flow Measurement

The ADDA-FL-DC measures the volumetric flow of conductive liquids using Faraday’s law of electromagnetic induction. The system consists of a flow sensor and a converter, with integral and remote configurations available. Electrodes detect the voltage generated as the liquid passes through the magnetic field.

विशेषताएं

  • Unobstructed measuring tube with no moving flow-restricting components.
  • Accuracy grades of 1.0, 0.5 and 0.2, selected to suit the application.
  • Electrode, liner and body material options for different conductive liquids.
  • Pulse, frequency, 4–20 mA, optional HART, and Modbus RTU over RS485 output options.

अनुप्रयोगों

Suitable applications include power generation, metallurgy, chemical processing, petroleum and petrochemical processes, municipal water systems, environmental treatment, food processing and pharmaceutical production. Select the wetted materials, lining, connections and temperature rating for the actual medium and operating conditions.

ऑपरेटिंग सिद्धांत

The induced voltage is proportional to liquid velocity when the magnetic field and pipe diameter are fixed. The catalogue expresses this relationship as E = B × V × D, where E is induced voltage, B is magnetic flux density, V is mean liquid velocity and D is the internal pipe diameter. Volumetric flow is Q = V × πD² / 4.

Electromagnetic flow measurement diagram with magnetic field and electrodes
Electromagnetic measurement principle

तकनीकी विनिर्देश

पैरामीटरविशिष्टता
Applicable mediumConductive liquids with conductivity ≥5 μS/cm
Product standard listed in the catalogueJB/T 9248-2015
Body and flange materialsCarbon steel, 304 stainless steel or 316 stainless steel
Threaded connection sizesDN15–DN50
Flanged connection sizesDN4–DN300
Clamp connection sizesDN15–DN100
Medium temperature−20°C to +150°C; actual limits depend on lining and configuration
Ambient temperature−20°C to +55°C
Ambient relative humidity5%–95%
Accuracy grades1.0, 0.5 or 0.2
RepeatabilityBetter than one third of the absolute maximum permissible error for the selected accuracy grade
बिजली की आपूर्ति24 VDC (20–36 V) or 220 VAC (90–250 V)
Signal outputsPulse; frequency; 4–20 mA; 4–20 mA + HART; Modbus RTU RS485
Enclosure protection optionsIP65, IP67 or IP68, depending on the selected configuration

Liner Temperature Limits

The liner limit does not override the complete meter’s specified operating limit. Confirm the usable temperature range for the selected assembly.

LinerRemote configurationIntegral configuration
PTFE or PFA−30°C to +150°C−30°C to +80°C
F46−30°C to +100°C−30°C to +80°C
Neoprene−15°C to +80°C−15°C to +80°C
Polyurethane−15°C to +60°C−15°C to +60°C

Pressure Ratings by Connection

Pressure ratings are connection- and size-dependent. A dash indicates that the connection is not listed for that size.

Pressure Ratings by Connection — Threaded PN and Flanged PN
नाममात्र आकारThreaded PNFlanged PN
DN4—10~40
DN6—10~40
DN10—10~40
DN151610~160
DN201610~160
डीएन251610~160
DN321610~160
डीएन401610~160
डीएन501610~160
DN65—10~160
डीएन80—10~160
डीएन100—10~160
DN125—10~160
डीएन150—10~160
डीएन200—10~40
डीएन250—10~40
DN300—10~40
Pressure Ratings by Connection — Flanged Class and Clamp PN
नाममात्र आकारFlanged ClassClamp PN
DN4——
DN6——
DN10——
DN15150~90010
DN20150~90010
डीएन25150~90010
DN32150~90010
डीएन40150~90010
डीएन50150~90010
DN65150~90010
डीएन80150~90010
डीएन100150~90010
DN125150~900—
डीएन150150~900—
डीएन200150~300—
डीएन250150~300—
DN300150~300—

Configuration Options

आइटमAvailable options
ConstructionIntegral or remote
Electrode materials316L, HC, titanium, tantalum, platinum or tungsten carbide
LiningNeoprene, polyurethane, PTFE, F46 or PFA
Body materialsCarbon steel, 304 stainless steel or 316 stainless steel
Electrical entriesM20 × 1.5 or 1/2 NPT
Grounding arrangementsNo grounding ring, grounding ring or grounding electrode; grounding electrode material matches the measuring electrode material
Hazardous-area optionFlameproof option listed as Exdb IIC T6 Gb; a non-explosion-protected option is also listed. Confirm the applicable marking and documentation for the ordered configuration.

Specify the required flange standard and sealing face, or the thread or clamp dimensions, when ordering.

Flanged Dimensions

Dimensions below are in millimetres and apply to the PN10 flange arrangement shown.

Electromagnetic flow meter transmitter and flange dimensions
Integral flanged meter dimensions
Flanged electromagnetic flow meter side and end dimensional views
Remote sensor dimensions
PN10 flanged dimensions in mm
नाममात्र आकारLDKn × d
420090604×φ14
620090604×φ14
1020090604×φ14
1520095654×φ14
20200105754×φ14
25200115854×φ14
322001401004×φ18
402001501104×φ18
502001651254×φ18
652001851458×φ18
802002001608×φ18
1002502201808×φ18
1252502502108×φ18
1503002852408×φ22
2003503402958×φ22
25045039535012×φ22
30050044540012×φ22

Clamp Dimensions

Compact electromagnetic flow meter dimensional drawing
Clamp connection dimensions
Clamp dimensions in mm — Part 1 of 2
नाममात्र आकारLDA
1520010834
2020010834
2520010850.5
3220010850.5
4025012664
5025015164
6525015177.5
8025020191
100250201119
Clamp dimensions in mm — Part 2 of 2
नाममात्र आकारBb
1527.512.7
2027.517.2
2543.522.6
3243.531.3
4056.537.6
5056.548.6
6570.560.3
8083.572.9
10011097.6

Threaded Dimensions

Threaded electromagnetic flow meter body and transmitter dimensions
Threaded connection dimensions
Threaded dimensions in mm
नाममात्र आकारLDThread G
15200108G1/2
20200108G3/4
25200108G1
32200108G1 1/4
40250126G1 1/2
50250151G2

Installation Guidance

Upstream disturbanceUpstream straight lengthDownstream straight length
Two-dimensional bend5 × DN2 × DN
Three-dimensional bend10 × DN2 × DN
Tee10 × DN2 × DN
  • Keep the measuring tube full. Prefer a low point or rising pipe section; avoid high points where air can accumulate.
  • Avoid a vertical arrangement discharging directly to an open outlet unless back pressure is controlled.
  • Prefer installation downstream of a pump after flow disturbances have subsided, and upstream of a control valve. Avoid cavitation.
  • If the drop to the discharge valve exceeds 5 m, provide a vent at the highest point above the flow meter as shown in the installation design.
  • Align the converter above or below the pipe axis. Keep mating flanges parallel; the catalogue specifies Lmax − Lmin < 0.5 mm for flange-face misalignment.
  • Ground the meter according to the applicable installation requirements.

संबंधित उत्पाद

केस शोकेस

अक्सर पूछे जाने वाले प्रश्न

उत्पाद चयन, अनुकूलन, तकनीकी पैरामीटर, वितरण और ADDA औद्योगिक माप उपकरणों के समर्थन के बारे में त्वरित उत्तर खोजें।.

官网询盘

यदि दूरस्थ निगरानी की आवश्यकता है तो कृपया मापा माध्यम, मापने की सीमा, प्रक्रिया तापमान, प्रक्रिया दबाव, कनेक्शन प्रकार, आउटपुट सिग्नल, बिजली आपूर्ति, स्थापना वातावरण और संचार विधि प्रदान करें।.

हाँ। ADDA रेंज, प्रक्रिया कनेक्शन, गीली सामग्री, प्रदर्शन प्रकार, संचार प्रोटोकॉल, स्थापना विधि और कार्य वातावरण को मापने के आधार पर अनुकूलित समाधान प्रदान कर सकता है।.

कई एडीडीए उपकरण विस्फोट-सबूत या आंतरिक रूप से सुरक्षित कॉन्फ़िगरेशन के साथ उपलब्ध हैं कृपया चयन से पहले साइट वर्गीकरण और प्रमाणन आवश्यकताओं की पुष्टि करें।.

हाँ। हमारी टीम माध्यम, रेंज, कनेक्शन, आउटपुट सिग्नल और इंस्टॉलेशन आवश्यकताओं सहित आपकी एप्लिकेशन स्थितियों की समीक्षा करने के बाद एक उपयुक्त उपकरण कॉन्फ़िगरेशन की सिफारिश करने में मदद कर सकती है।.

लीड समय उत्पाद प्रकार, मात्रा, अनुकूलन आवश्यकताओं और प्रमाणन आवश्यकताओं पर निर्भर करता है मानक उत्पादों में आमतौर पर कम वितरण समय होता है, जबकि अनुकूलित मॉडल को अतिरिक्त उत्पादन समय की आवश्यकता हो सकती है।.

सहयोग के लिए हमसे संपर्क करें

官网询盘