منتجات

ADDA-FL-TY مقياس تدفق التروس البيضاوي

ADDA-FL-TY مقياس تدفق التروس البيضاوي

مقياس تدفق الإزاحة الإيجابية للسوائل النظيفة والزيوت والوقود والوسائط اللزجة. متوفر في DN10 wondN200 مع شاشة LCD، ودقة 0.5% (0.2% اختياري)، وخيارات إخراج نبض 4.50 مللي أمبير أو Modbus RTU RS485.

شهادات التأهيل الرسمية

نحن حاصلون على شهادة الجودة ISO، ومؤهلات المؤسسات الوطنية عالية التقنية، والموافقة على نوع أداة القياس الصينية، وشهادات مقاومة الانفجار والسلامة لدعم جودة المنتج الموثوقة.

الهندسة المخصصة

مواد قابلة للتكوين، واتصالات، وإشارات، وشاشات عرض، وحلول تثبيت لبيئات العمليات المختلفة.

نظرة عامة على المنتج

The ADDA-FL-TY Oval Gear Flow Meter is a positive displacement meter for measuring liquids in a completely filled pipe. A pair of intermeshing oval gears divides the liquid into fixed volumes. The number of gear rotations is used to determine the volume passing through the meter.

It is suitable for oil and fuel metering, as well as clean liquids such as lubricating oil, resins, adhesives and syrups. The meter configuration, wetted materials and seals must be selected for the liquid, viscosity, pressure and temperature of the application.

الميزات الرئيسية

  • Positive displacement measurement for a wide range of liquid viscosities.
  • 0.5% accuracy, with a 0.2% option.
  • No upstream or downstream straight pipe run required.
  • LCD indication with pulse, 4–20 mA and RS485 output options.
  • Standard, high-temperature, high-viscosity and jacketed configurations available.
  • Simple, established mechanical construction with good repeatability.
  • Typical turndown ratio of 10:1; the applicable range depends on viscosity and configuration.
  • Relatively low pressure loss; actual pressure drop depends on the fluid and operating flow.

مبدأ التشغيل

The pressure difference between the inlet and outlet (ΔP = P₁ − P₂) drives a pair of intermeshing oval gears in the measuring chamber. The gears, housing and cover form crescent-shaped measuring cavities. As the gears rotate, they carry fixed volumes of liquid from the inlet to the outlet.

The two gears alternately act as the driving and driven gear. Each quarter-turn displaces one cavity volume; one full revolution displaces four cavity volumes. Gear rotation is transmitted to the counting mechanism through a magnetic coupling or sealed coupling.

Totalized volume: V = 4 × u₀ × n, where u₀ is the volume of one crescent-shaped cavity and n is the total number of gear revolutions.

Oval gear flow meter gear positions through a measurement cycle

Four stages of oval gear rotation. Click the diagram to view the full-size image.

المواصفات الفنية

معلمةتخصيص
ModelADDA-FL-TY
Measuring principlePositive displacement with oval gears
Nominal diameterDN10–DN200
دقة±0.5% F.S.; ±0.2% F.S. optional
تصنيف الضغط1.0–6.3 MPa, depending on configuration
Medium temperatureStandard LCD version: −20 to +60°C; high-temperature LCD version: −20 to +150°C
مادة304 or 316L stainless steel; seal materials selected to suit the medium
مصدر طاقة24 V DC or 3.6 V lithium battery, depending on configuration
خيارات الإخراجPulse, 4–20 mA, Modbus RTU over RS485
يعرضشاشة رقمية LCD
حماية الدخولIP66

Pressure rating, temperature limit, power supply and outputs depend on the selected configuration. Confirm material and seal compatibility before ordering.

نطاقات التدفق

Select the flow range using the nominal diameter, liquid viscosity and required accuracy. All flow values below are in m³/h; viscosity values are in mPa·s. A dash means the catalogue does not specify a range for that combination.

Liquid viscosity: 0.6–2 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.2–0.4—
DN150.6–1.5—
DN200.8–31.5–3
DN251.2–63–6
DN405–158–15
DN506–2412–24
DN6510–4020–40
DN8010–4020–40
DN10030–10040–100
DN15045–19090–190
DN20068–340170–340

Liquid viscosity: 2–200 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.08–0.40.2–0.4
DN150.3–1.50.5–1.5
DN200.6–31–3
DN250.8–61.2–6
DN403–155–15
DN504–248–24
DN658–4010–40
DN808–4010–40
DN10015–10020–100
DN15034–19056–190
DN20056–34068–340

Liquid viscosity: 200–1000 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.04–0.30.08–0.3
DN150.2–1.00.3–1.0
DN200.4–2.10.6–2.1
DN250.6–4.21–4.2
DN402.1–10.53–10.5
DN502.4–16.84–16.8
DN656–288–28
DN806–288–28
DN10010–7015–70
DN15027–13334–133
DN20048–23856–238

Liquid viscosity: 1000–2000 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.03–0.20.06–0.2
DN150.1–0.70.2–0.7
DN200.25–1.50.5–1.5
DN250.6–30.8–3
DN401.0–7.52–7.5
DN502–123–12
DN654–206–20
DN804–206–20
DN10010–5012–50
DN15019–9530–95
DN20034–17050–170

Applications and Media

Applications include petroleum and petrochemical processing, chemicals, environmental protection, marine systems, metallurgy, power generation, transportation, food processing, pharmaceuticals, defense and research.

Typical media include clean oils and petroleum products, diesel, lubricating oils, adhesives, emulsions, asphalt, resins and syrups. Some acidic or alkaline liquids can be measured with compatible materials and seals. Select the meter for the actual medium and operating conditions; application suitability does not imply a particular hygienic or industry certification.

اختيار النموذج

Base model: ADDA-FL-TY. The following codes identify available configuration options; confirm the complete model combination before ordering. Power supply and signal compatibility depend on the selected configuration.

عنصرشفرةخيار
Product seriesغيغاواطHigh-temperature version
Product seriesجي إنHigh-viscosity version
Product seriesجي تيJacketed version
Nominal diameterDN10–DN200Specify the required nominal diameter
تصنيف الضغطPN10 وPN63Specify the flange standard and sealing face when ordering
مادة4304 ستانلس ستيل
مادة6316 لتر ستانلس ستيل
Output signalAنبض + 4 & 20 مللي أمبير
Output signalBنبض ثلاثي الأسلاك
Output signalCسلكين 4 · 20 مللي أمبير
Output signalDThree-wire 4–20 mA
Output signalEنبض + 4 بوصة 20 مللي أمبير + Modbus RTU RS485
Output signalFنبض + 4 بوصة 20 مللي أمبير + Modbus RTU RS485، مع هارت
توصيل كهربائيSM20 × 1.5، PVC
توصيل كهربائيMM20 × 1.5، SUS304
توصيل كهربائيN1/2 معاهدة حظر الانتشار النووي، SUS304
دقة1±0.5% FS.
دقة2±0.2% FS.
الحماية من الانفجارNNon-explosion-proof version
الحماية من الانفجارDFlameproof option: Ex db IIC T6 Gb

The standard version is identified as GC in the flow-range table. Explosion protection is an optional configuration, not a rating shared by every version. Confirm the marking and documentation for the instrument supplied.

أبعاد

All linear dimensions below are in millimetres (mm). N is the number of bolt holes and Ø is the bolt-hole diameter. Click each drawing to view its full-size image.

DN10 to DN50 and DN65 DN80

ADDA-FL-TY dimensional drawing for DN10 to DN50 and DN65 DN80 oval gear flow meters

DN100

ADDA-FL-TY DN100 oval gear flow meter dimensional drawing with L H B C I D D1 and bolt hole references

DN150 and DN200

ADDA-FL-TY dimensional drawing for DN150 and DN200 oval gear flow meters

Overall Dimensions

DNLHBCI
1017010021814045
1520012023816048
2023015024316558
2526018224616864
4026518228220477
5026518229121392
65350255380275125
80350255380275125
100515418468338131
150540510557377210
200650650624436247

Flange and Bolt Dimensions

DNDD1NØ
109060414
159565414
2010575414
2511585414
40150110418
50165125418
65185145418
80200160818
100220180818
150285240823
2003402951223

Flange basis: Flange dimensions are based on a pressure rating of 1.6 MPa. Overall length and flange dimensions can be customized.

High-temperature version: For DN15–DN50, add 100 mm to dimension B for the thermal extension tube. This allowance does not apply to the other sizes listed above.

Selection and Ordering

Provide the liquid name, viscosity at operating temperature, minimum and maximum flow, pipe diameter, operating pressure and temperature, flange standard, preferred power supply and required output. The high-viscosity and high-temperature versions should be selected for the corresponding service conditions. Confirm the applicable configuration with ADDA before ordering.

المنتجات ذات الصلة

معرض القضية

الأسئلة المتداولة

ابحث عن إجابات سريعة حول اختيار المنتج، والتخصيص، والمعلمات الفنية، والتسليم، ودعم أدوات القياس الصناعية ADDA.

官网询盘

يرجى تقديم الوسيط المقاس ونطاق القياس ودرجة حرارة العملية وضغط العملية ونوع الاتصال وإشارة الخرج وإمدادات الطاقة وبيئة التثبيت وطريقة الاتصال إذا كانت المراقبة عن بعد مطلوبة.

نعم. يمكن لـ ADDA توفير حلول مخصصة تعتمد على نطاق القياس، واتصال العملية، والمواد المبللة، ونوع العرض، وبروتوكول الاتصال، وطريقة التثبيت، وبيئة العمل.

تتوفر العديد من أدوات ADDA بتكوينات مقاومة للانفجار أو آمنة بشكل جوهري. يرجى تأكيد تصنيف الموقع ومتطلبات الاعتماد قبل الاختيار.

نعم. يمكن لفريقنا المساعدة في التوصية بتكوين مناسب للأداة بعد مراجعة شروط التطبيق الخاصة بك، بما في ذلك متطلبات المتوسط والمدى والاتصال وإشارة الخرج والتركيب.

تعتمد المهلة الزمنية على نوع المنتج والكمية ومتطلبات التخصيص واحتياجات إصدار الشهادات. عادةً ما يكون للمنتجات القياسية وقت تسليم أقصر، بينما قد تتطلب النماذج المخصصة وقتًا إضافيًا للإنتاج.

اتصل بنا للتعاون

官网询盘