ADDA-FL-TY ओवल गियर फ्लो मीटर

स्वच्छ तरल पदार्थ, तेल, ईंधन और चिपचिपा मीडिया के लिए सकारात्मक विस्थापन प्रवाह मीटर एलसीडी डिस्प्ले, ०.५१ टीपी ३ टी सटीकता (०.२१ टीपी ३ टी वैकल्पिक), और पल्स, ४,२० एमए या मोडबस आरटीयू आरएस ४८५ आउटपुट विकल्पों के साथ डीएन १० ईएसटीएन २०० में उपलब्ध है।.

आधिकारिक योग्यता प्रमाणपत्र

हम आईएसओ गुणवत्ता प्रमाणन, राष्ट्रीय उच्च तकनीक उद्यम योग्यता, चीन मापने उपकरण प्रकार अनुमोदन, और विस्फोट प्रूफ और सुरक्षा प्रमाण पत्र विश्वसनीय उत्पाद की गुणवत्ता का समर्थन करने के लिए।.

कस्टम इंजीनियरिंग

विभिन्न प्रक्रिया वातावरणों के लिए कॉन्फ़िगर करने योग्य सामग्री, कनेक्शन, सिग्नल, डिस्प्ले और इंस्टॉलेशन समाधान।.

उत्पाद अवलोकन

The ADDA-FL-TY Oval Gear Flow Meter is a positive displacement meter for measuring liquids in a completely filled pipe. A pair of intermeshing oval gears divides the liquid into fixed volumes. The number of gear rotations is used to determine the volume passing through the meter.

It is suitable for oil and fuel metering, as well as clean liquids such as lubricating oil, resins, adhesives and syrups. The meter configuration, wetted materials and seals must be selected for the liquid, viscosity, pressure and temperature of the application.

प्रमुख विशेषताएं

  • Positive displacement measurement for a wide range of liquid viscosities.
  • 0.5% accuracy, with a 0.2% option.
  • No upstream or downstream straight pipe run required.
  • LCD indication with pulse, 4–20 mA and RS485 output options.
  • Standard, high-temperature, high-viscosity and jacketed configurations available.
  • Simple, established mechanical construction with good repeatability.
  • Typical turndown ratio of 10:1; the applicable range depends on viscosity and configuration.
  • Relatively low pressure loss; actual pressure drop depends on the fluid and operating flow.

ऑपरेटिंग सिद्धांत

The pressure difference between the inlet and outlet (ΔP = P₁ − P₂) drives a pair of intermeshing oval gears in the measuring chamber. The gears, housing and cover form crescent-shaped measuring cavities. As the gears rotate, they carry fixed volumes of liquid from the inlet to the outlet.

The two gears alternately act as the driving and driven gear. Each quarter-turn displaces one cavity volume; one full revolution displaces four cavity volumes. Gear rotation is transmitted to the counting mechanism through a magnetic coupling or sealed coupling.

Totalized volume: V = 4 × u₀ × n, where u₀ is the volume of one crescent-shaped cavity and n is the total number of gear revolutions.

Oval gear flow meter gear positions through a measurement cycle

Four stages of oval gear rotation. Click the diagram to view the full-size image.

तकनीकी विनिर्देश

पैरामीटरविशिष्टता
ModelADDA-FL-TY
Measuring principlePositive displacement with oval gears
Nominal diameterDN10–DN200
सटीकता±0.5% F.S.; ±0.2% F.S. optional
दबाव रेटिंग1.0–6.3 MPa, depending on configuration
Medium temperatureStandard LCD version: −20 to +60°C; high-temperature LCD version: −20 to +150°C
सामग्री304 or 316L stainless steel; seal materials selected to suit the medium
बिजली की आपूर्ति24 V DC or 3.6 V lithium battery, depending on configuration
आउटपुट विकल्पPulse, 4–20 mA, Modbus RTU over RS485
प्रदर्शनएलसीडी डिजिटल डिस्प्ले
प्रवेश सुरक्षाआईपी66

Pressure rating, temperature limit, power supply and outputs depend on the selected configuration. Confirm material and seal compatibility before ordering.

प्रवाह श्रेणियाँ

Select the flow range using the nominal diameter, liquid viscosity and required accuracy. All flow values below are in m³/h; viscosity values are in mPa·s. A dash means the catalogue does not specify a range for that combination.

Liquid viscosity: 0.6–2 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.2–0.4—
DN150.6–1.5—
DN200.8–31.5–3
डीएन251.2–63–6
डीएन405–158–15
डीएन506–2412–24
DN6510–4020–40
डीएन8010–4020–40
डीएन10030–10040–100
डीएन15045–19090–190
डीएन20068–340170–340

Liquid viscosity: 2–200 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.08–0.40.2–0.4
DN150.3–1.50.5–1.5
DN200.6–31–3
डीएन250.8–61.2–6
डीएन403–155–15
डीएन504–248–24
DN658–4010–40
डीएन808–4010–40
डीएन10015–10020–100
डीएन15034–19056–190
डीएन20056–34068–340

Liquid viscosity: 200–1000 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.04–0.30.08–0.3
DN150.2–1.00.3–1.0
DN200.4–2.10.6–2.1
डीएन250.6–4.21–4.2
डीएन402.1–10.53–10.5
डीएन502.4–16.84–16.8
DN656–288–28
डीएन806–288–28
डीएन10010–7015–70
डीएन15027–13334–133
डीएन20048–23856–238

Liquid viscosity: 1000–2000 mPa·s

SizeFlow at 0.5% accuracy (m³/h)Flow at 0.2% accuracy (m³/h)
DN100.03–0.20.06–0.2
DN150.1–0.70.2–0.7
DN200.25–1.50.5–1.5
डीएन250.6–30.8–3
डीएन401.0–7.52–7.5
डीएन502–123–12
DN654–206–20
डीएन804–206–20
डीएन10010–5012–50
डीएन15019–9530–95
डीएन20034–17050–170

Applications and Media

Applications include petroleum and petrochemical processing, chemicals, environmental protection, marine systems, metallurgy, power generation, transportation, food processing, pharmaceuticals, defense and research.

Typical media include clean oils and petroleum products, diesel, lubricating oils, adhesives, emulsions, asphalt, resins and syrups. Some acidic or alkaline liquids can be measured with compatible materials and seals. Select the meter for the actual medium and operating conditions; application suitability does not imply a particular hygienic or industry certification.

मॉडल चयन

Base model: ADDA-FL-TY. The following codes identify available configuration options; confirm the complete model combination before ordering. Power supply and signal compatibility depend on the selected configuration.

आइटमकोडविकल्प
Product seriesगीगावॉटHigh-temperature version
Product seriesजीएनHigh-viscosity version
Product seriesजेटीJacketed version
Nominal diameterDN10–DN200Specify the required nominal diameter
दबाव रेटिंगपीएन10 एपीपीएन63Specify the flange standard and sealing face when ordering
सामग्री4304 स्टेनलेस स्टील
सामग्री6316L स्टेनलेस स्टील
Output signalAपल्स + 4,20 एमए
Output signalBतीन-तार पल्स
Output signalCदो-तार 4,20 एमए
Output signalDThree-wire 4–20 mA
Output signalEपल्स + 4,20 एमए + मोडबस आरटीयू आरएस485
Output signalFपल्स + 4,20 एमए + मॉडबस आरटीयू आरएस485, हार्ट के साथ
विद्युत कनेक्शनSएम20×1.5, पीवीसी
विद्युत कनेक्शनMएम20×1.5, एसयूएस304
विद्युत कनेक्शनN1/2 एनपीटी, एसयूएस304
सटीकता1±0.5% एफएस.
सटीकता2±0.2% एफएस.
विस्फोट सुरक्षाNNon-explosion-proof version
विस्फोट सुरक्षाDFlameproof option: Ex db IIC T6 Gb

The standard version is identified as GC in the flow-range table. Explosion protection is an optional configuration, not a rating shared by every version. Confirm the marking and documentation for the instrument supplied.

आयाम

All linear dimensions below are in millimetres (mm). N is the number of bolt holes and Ø is the bolt-hole diameter. Click each drawing to view its full-size image.

DN10 to DN50 and DN65 DN80

ADDA-FL-TY dimensional drawing for DN10 to DN50 and DN65 DN80 oval gear flow meters

डीएन100

ADDA-FL-TY DN100 oval gear flow meter dimensional drawing with L H B C I D D1 and bolt hole references

DN150 and DN200

ADDA-FL-TY dimensional drawing for DN150 and DN200 oval gear flow meters

Overall Dimensions

DNLHBCI
1017010021814045
1520012023816048
2023015024316558
2526018224616864
4026518228220477
5026518229121392
65350255380275125
80350255380275125
100515418468338131
150540510557377210
200650650624436247

Flange and Bolt Dimensions

DNDD1NØ
109060414
159565414
2010575414
2511585414
40150110418
50165125418
65185145418
80200160818
100220180818
150285240823
2003402951223

Flange basis: Flange dimensions are based on a pressure rating of 1.6 MPa. Overall length and flange dimensions can be customized.

High-temperature version: For DN15–DN50, add 100 mm to dimension B for the thermal extension tube. This allowance does not apply to the other sizes listed above.

Selection and Ordering

Provide the liquid name, viscosity at operating temperature, minimum and maximum flow, pipe diameter, operating pressure and temperature, flange standard, preferred power supply and required output. The high-viscosity and high-temperature versions should be selected for the corresponding service conditions. Confirm the applicable configuration with ADDA before ordering.

संबंधित उत्पाद

केस शोकेस

अक्सर पूछे जाने वाले प्रश्न

उत्पाद चयन, अनुकूलन, तकनीकी पैरामीटर, वितरण और ADDA औद्योगिक माप उपकरणों के समर्थन के बारे में त्वरित उत्तर खोजें।.

官网询盘

यदि दूरस्थ निगरानी की आवश्यकता है तो कृपया मापा माध्यम, मापने की सीमा, प्रक्रिया तापमान, प्रक्रिया दबाव, कनेक्शन प्रकार, आउटपुट सिग्नल, बिजली आपूर्ति, स्थापना वातावरण और संचार विधि प्रदान करें।.

हाँ। ADDA रेंज, प्रक्रिया कनेक्शन, गीली सामग्री, प्रदर्शन प्रकार, संचार प्रोटोकॉल, स्थापना विधि और कार्य वातावरण को मापने के आधार पर अनुकूलित समाधान प्रदान कर सकता है।.

कई एडीडीए उपकरण विस्फोट-सबूत या आंतरिक रूप से सुरक्षित कॉन्फ़िगरेशन के साथ उपलब्ध हैं कृपया चयन से पहले साइट वर्गीकरण और प्रमाणन आवश्यकताओं की पुष्टि करें।.

हाँ। हमारी टीम माध्यम, रेंज, कनेक्शन, आउटपुट सिग्नल और इंस्टॉलेशन आवश्यकताओं सहित आपकी एप्लिकेशन स्थितियों की समीक्षा करने के बाद एक उपयुक्त उपकरण कॉन्फ़िगरेशन की सिफारिश करने में मदद कर सकती है।.

लीड समय उत्पाद प्रकार, मात्रा, अनुकूलन आवश्यकताओं और प्रमाणन आवश्यकताओं पर निर्भर करता है मानक उत्पादों में आमतौर पर कम वितरण समय होता है, जबकि अनुकूलित मॉडल को अतिरिक्त उत्पादन समय की आवश्यकता हो सकती है।.

सहयोग के लिए हमसे संपर्क करें

官网询盘