Products

Smart Single Flange Differential Pressure Transmitter

Categories Pressure Transmitters, Smart Industrial Transmitters

Smart Single Flange Differential Pressure Transmitter

The ADDA-P Series smart single flange differential pressure transmitter uses monocrystalline silicon sensing technology for pressure and level applications. An embedded signal processing module provides static pressure and temperature compensation. It is suitable for media compatible with the wetted materials; the maximum static pressure also depends on the flange pressure rating.

Authoritative Qualification Certifications

We hold ISO quality certification, national high-tech enterprise qualification, China measuring instrument type approval, and explosion-proof and safety certifications to support reliable product quality.

Custom Engineering

Configurable materials, connections, signals, displays, and installation solutions for different process environments.

Product Features

The ADDA-P Series uses a monocrystalline silicon sensor chip manufactured with advanced German MEMS technology and a dual-beam suspended design. It provides high accuracy, high overpressure resistance, and stable performance. An embedded signal processing module combines static pressure and temperature compensation to maintain measurement accuracy and long-term stability across a wide range of pressure and temperature conditions.

Monocrystalline silicon piezoresistive technology provides stable performance and accuracy up to 0.075%F.S.
Turndown ratio up to 100 : 1.
A high-performance EMC protection circuit module reduces the influence of electromagnetic interference on the output.
High stability: ±0.2% Span/5 years.

Applications

Pressure and level measurement.

Measuring Medium

Media compatible with the wetted materials.

Performance Specifications

Accuracy	±0.1%, ±0.2% Upper Range Limit, see specifications for details
Range	6kPa~3MPa, see selection table for details
Annual Stability	±0.2% Span/5 years
Ambient Temperature Influence	see specifications for details
Voltage Influence	When the supply voltage varies within 10.5V/16.5V~36V DC, changes in zero point and span shall not exceed ±0.001%URL/V
Mounting Position Influence	Transmitter installation may cause zero error, this error can be corrected by zero adjustment, with no effect on accuracy
Vibration Influence	Tested according to GB/T18271.3/IEC61298-3 test, < 0.1%
Output Signal	4mA~20mADC+HART Modbus-RTU/RS485
Protection Grade	IP67

Range

Nominal Range	Minimum Range	Lower Range Limit (LRL)	Upper Range Limit (URL)	Static Pressure Range*	High-Side Overload	Low-Side Overload
40kPa	10kPa	-40kPa	40kPa	40MPa	25MPa	16MPa
250kPa	50kPa	-250kPa	250kPa	40MPa	25MPa	500kPa
1MPa	100kPa	-500kPa	1MPa	40MPa	25MPa	500kPa
3MPa	300kPa	-500kPa	3MPa	40MPa	25MPa	500kPa
High and low limit setting requirements: lower range value (LRV) and upper range value (URV) must be set within the lower and upper range limits, ｜URV-LRV｜≥ Minimum Range *Refers to the maximum static pressure range of the sensor; the maximum static pressure range of the transmitter ultimately depends on the pressure rating of the flange

Accuracy

Linear Output Accuracy	TD<=5	±0.1% Span	40kPa, 250kPa, 1MPa, 3MPa
Based on standards and reference test conditions , including best fit straight line (BFSL), hysteresis, repeatability. Calibration temperature :20 degrees C ±5 degrees C .
TD>5	±(0.005+0.025TD) % Span
Note: TD (Turn down) means turndown ratio , TD= maximum range / current range .

Ambient Temperature Influence

6kPa, 40kPa , 250kPa, 1MPa, 3MPa	± (0.1+0.015TD)%20 degrees C of Span

Environmental Conditions

Hazardous Area	PCEC	Certificate No.: CE20.2148X Certificate No.: CE23.0612X Ex ia IIC T6 Ga Ex db IIC T6 Gb Ex tb IIIC T80 degrees C Db
Item	Condition
Operating Ambient Temperature Range	-40 degrees C ~ 85 degrees C, LCD display: -20 degrees C ~ 70 degrees C
Storage Ambient Temperature Range	-40 degrees C ~ 100 degrees C, LCD display: -40 degrees C ~ 85 degrees C
Measured Medium Temperature Range	Normal-temperature silicone oil: -40 degrees C ~ 205 degrees C
Inert filling liquid: -20 degrees C ~ 160 degrees C
High-temperature silicone oil: 0 degrees C ~315 degrees C
Operating Ambient Humidity Range	5%RH~100%RH@40 degrees C

Time Specifications

Total damping time constant: equals the sum of the electronic circuit component damping time constant and sensor capsule damping time constant

Electronic circuit component damping time: 0s~99s adjustable range

Overall response time: <= 90ms (base instrument response time only, excluding diaphragm system response time)

Electromagnetic Compatibility Environment (current signal only)

No.	Test Item	Basic Standard	Test Condition	Performance Level
1	Radiated Disturbance (Enclosure)	GB/T 9254.1/CISPR22	30MHz-1000MHz	B (Note 2)
2	Conducted Disturbance (DC Power Port)	GB/T 9254.1/CISPR22	0.15MHz-30MHz	B (Note 2)
3	Electrostatic Discharge (ESD) Immunity	GB/T 17626.2/IEC61000-4-2	4kV (contact), 8kV (air)	A (Note 1)
4	RF Electromagnetic Field Immunity	GB/T 17626.3/IEC61000-4-3	10V/m (80MHz-1GHz)	A (Note 1)
5	Power Frequency Magnetic Field Immunity	GB/T 17626.8/IEC61000-4-8	30A/m	A (Note 1)
6	Electrical Fast Transient/Burst Immunity	GB/T 17626.4/IEC61000-4-4	2kV (5/50ns, 100kHz)	A (Note 1)
7	Surge Immunity	GB/T 17626.5/IEC61000-4-5	4kV (line-to-line) 2kV (line-to-ground)	A (Note 1)
8	Conducted Disturbance Immunity Induced by RF Fields	GB/T 17626.6/IEC61000-4-6	3V (150kHz-80MHz)	A (Note 1)
Note 1: For performance level A, performance remains normal within the technical specification limits Note 2: For performance level B, function or performance may temporarily decrease or be lost, but can recover automatically, actual operating status, storage and data remain unchanged

Power Supply and Load Conditions

Item	Operating Condition
Power Supply Voltage	HART communication protocol: 16.5V~36V DC
Intrinsically safe version: HART communication protocol: 18.5V~28V DC
Modbus-RTU/RS485: 12V~36V DC
Load Resistance	0Ω~2119Ω during operation 250Ω~600Ω for HART communication
Transmission Distance	< 1000m
Power Consumption
4mA~20mA	<= 500mW@24V DC, 20.8mA
Modbus-RTU/RS485	<= 240mW@24V DC, 10mA

Product Categories

Quick Contact

Frequently Asked Questions

Find quick answers about product selection, customization, technical parameters, delivery, and support for ADDA industrial measurement instruments.

What information should I provide before selecting an instrument?

Please provide the measured medium, measuring range, process temperature, process pressure, connection type, output signal, power supply, installation environment, and communication method if remote monitoring is required.

Can ADDA customize instruments for specific applications?

Yes. ADDA can provide customized solutions based on measuring range, process connection, wetted material, display type, communication protocol, installation method, and working environment.

Are your instruments suitable for hazardous areas?

Many ADDA instruments are available with explosion-proof or intrinsically safe configurations. Please confirm the site classification and certification requirements before selection.

What industries are your products used in?

Yes. Our team can help recommend a suitable instrument configuration after reviewing your application conditions, including medium, range, connection, output signal, and installation requirements.

Do you provide technical support for product selection?

Lead time depends on product type, quantity, customization requirements, and certification needs. Standard products usually have a shorter delivery time, while customized models may require additional production time.

Adda

Products

Smart Single Flange Differential Pressure Transmitter