Medidor de nivel magnético
Descripción general del producto
The ADDA-LE-68 Series magnetic level gauge is used for detecting liquid level or interface in equipment made from various materials. The product details state that the detection section and display section are completely isolated, making it suitable for high-temperature, high-pressure, toxic, harmful, and strongly corrosive media.
With a built-in integrated level transmitter, the level or interface signal can be converted into a two-wire 4~20mADC standard signal for remote level detection and control.
Aplicaciones
Product details include electric power, petrochemical, chemical metallurgy, environmental protection, and other industries.
Principio de funcionamiento
The magnetic level gauge is developed according to the buoyancy principle, also known as Archimedes’ principle, combined with magnetic coupling. When the level in the measured vessel rises or falls, the float inside the main tube of the level gauge rises or falls accordingly.
The permanent magnet inside the float transfers the magnetic coupling action to the on-site indicator, driving the red and white flaps to turn. When the level rises, the flaps change from white to red; when the level falls, they change from red to white. The red-white boundary indicates the actual medium level in the vessel.
Características clave
- Multiple specifications for high-pressure, high-temperature, and corrosive environments.
- PVC, PP, and PVDF materials are suitable for strong acid and alkali environments.
- SUS304 / SUS316 metal materials are suitable for high-temperature and high-pressure operating conditions.
- Clear visual indication and direct reading.
- On-site indication, large measuring range, and no blind zone according to the product details.
- Multi-point control, easy installation, and special specifications according to customer requirements.
Technical Specifications – Conventional Type
| Parámetro | Valor |
|---|
| Modelo de producto | ADDA-LE-68-CG1 conventional plug type / ADDA-LE-68-CG2 conventional pipe cap type / ADDA-LE-68-CG3 conventional flange type |
| Conexión de proceso | Brida/rosca |
| Rango | 300~6000 mm |
| Precisión | +/-10m |
| Material mojado | SUS304, SUS316 |
| Presión del proceso | -0.1~6.3MPa |
| Temperatura del proceso | -20~120 deg C / -20~200 deg C / -20~400 deg C |
| Salida de señal | 4~20mA, 4~20mA HART, magnetic switch (SPDT output) |
| Medium Density | 0.55~1.55g/cm3 |
| Flap Indication | Aluminum alloy frame with scale |
| Grado de protección | IP67 |
| Grado a prueba de explosiones | Exd IIC T6 Gb |
Technical Specifications – Anti-Corrosion Type
| Parámetro | Valor |
|---|
| Modelo de producto | ADDA-LE-68-FF1 flat cover anti-corrosion type / ADDA-LE-68-FF2 flange anti-corrosion type / ADDA-LE-68-FF3 pipe cap anti-corrosion type |
| Conexión de proceso | Flange; flange / thread |
| Rango | 300~3000 mm |
| Precisión | +/-10m |
| Material mojado | SUS304+PTFE, SUS316+PTFE, SUS304+PP, SUS316+PP, PP, PTFE |
| Presión del proceso | -0.1~6.3MPa |
| Temperatura del proceso | -20~200 deg C (PP material maximum temperature 80 deg C) |
| Salida de señal | 4~20mA, 4~20mA HART, magnetic switch (SPDT output) |
| Medium Density | 0.55~1.55g/cm3 |
| Flap Indication | Aluminum alloy frame with scale |
| Grado de protección | IP67 |
| Grado a prueba de explosiones | Exd IIC T6 Gb |
Technical Specifications – Heating Type
| Parámetro | Valor |
|---|
| Modelo de producto | ADDA-LE-68-BR1 steam tracing type / ADDA-LE-68-BR2 electric tracing type / ADDA-LE-68-BR3 hollow heating type |
| Conexión de proceso | Flange; flange / thread |
| Rango | 300~6000 mm |
| Precisión | +/-10m |
| Material mojado | SUS304, SUS316 |
| Presión del proceso | -0.1~6.3MPa |
| Temperatura del proceso | -20~120 deg C / -20~120 deg C / -20~200 deg C |
| Salida de señal | 4~20mA, 4~20mA HART, magnetic switch (SPDT output) |
| Medium Density | 0.55~1.55g/cm3 |
| Flap Indication | Aluminum alloy frame with scale |
| Grado de protección | IP67 |
Technical Specifications – High Temperature / Top Mounted Type
| Parámetro | Valor |
|---|
| Modelo de producto | ADDA-LE-68-GY high-temperature high-pressure type / ADDA-LE-68-DZ top mounted type |
| Conexión de proceso | Flange; flange / thread |
| Rango | 300~6000 mm |
| Precisión | +/-10m |
| Material mojado | SUS304, SUS316 |
| Presión del proceso | 0~25MPa / 0~4MPa |
| Temperatura del proceso | 0~450 deg C / -20~200 deg C |
| Salida de señal | 4~20mA, 4~20mA HART, magnetic switch (SPDT output) |
| Medium Density | 0.55~1.55g/cm3 |
| Flap Indication | Aluminum alloy frame with scale |
| Grado de protección | IP67 |